anatase titanium dioxide pigment price supplier
...
2025-08-14 15:44
1033
As mentioned above, these oxide NPs are harmful in part because both anatase and rutile forms are semiconductors and produce ROS. Particularly, P25 kind has band-gap energies estimated of 3.2 and 3.0 eV, equivalent to radiation wavelengths of approximately 388 and 414 nm, respectively. Irradiation at these wavelengths or below produces a separation of charge, resulting in a hole in the valence band and a free electron in the conduction band, due to the electron movement from the valence to conduction bands. These hole–electron pairs generate ROS when they interact with H2O or O2 [43,44]. It was described that they can cause an increase in ROS levels after exposure to UV-visible light [45]. The NBT assay in the studied samples showed that bare P25TiO2NPs produce a large amount of ROS, which is drastically reduced by functionalization with vitamin B2 (Fig. 5). This vitamin, also known as riboflavin, was discovered in 1872 as a yellow fluorescent pigment, [46] but its function as an essential vitamin for humans was established more than sixty years later, and its antioxidant capacity was not studied until the end of the XX century [47,48]. This antioxidant role in cells is partially explained because the glutathione reductase enzyme (GR) requires it for good functionality. This enzyme is the one in charge of the conversion of oxidized glutathione to its reduced form which acts as a powerful inner antioxidant and can quench the ROS [49,50]. The cost of this action is that the glutathione is converted to the oxidized form and needs to be recovered by the GR. Consequently, the cells need more vitamin B2. Another glutathione action is the protection against hydroperoxide. This activity is also mediated by riboflavin. Therefore, local delivery of this vitamin seems to significantly help the cells in their fight to keep the oxidative balance, once they are exposed to high levels of ROS.
...
2025-08-14 15:35
2879
Once the raw materials are ground to the proper size, they are subjected to a series of chemical treatments to further enhance the performance of the pigment. These treatments help to improve the dispersibility, hiding power, and brightness of the lithopone 28-30%, making it suitable for a wide range of applications.
...
2025-08-14 15:12
1595
Lithopone B301, Lithopone B311 powder is also widely applied in paints and enamels
...
2025-08-14 14:49
1823
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.
...
2025-08-14 14:38
1131
≥100
...
2025-08-14 14:38
900
Overall, cosmetic grade titanium dioxide is a versatile and effective ingredient that is widely used in the cosmetics industry in China. Its ability to provide a smooth finish, sun protection, and long-lasting wear make it a popular choice for many cosmetic manufacturers. With the increasing demand for skincare and beauty products in China, the use of titanium dioxide in cosmetics is likely to continue to grow in the future.
...
2025-08-14 14:18
1265
...
2025-08-14 14:03
1028
One of the key factors that influence the quality of lithopone is its raw material composition. We carefully select high-quality barium sulfate and zinc sulfide as the main components, which are essential for the formation of the desired crystal structure and chemical properties of lithopone. To further enhance the performance of lithopone, we also add certain additives during the production process.
...
2025-08-14 13:49
1592
As mentioned above, these oxide NPs are harmful in part because both anatase and rutile forms are semiconductors and produce ROS. Particularly, P25 kind has band-gap energies estimated of 3.2 and 3.0 eV, equivalent to radiation wavelengths of approximately 388 and 414 nm, respectively. Irradiation at these wavelengths or below produces a separation of charge, resulting in a hole in the valence band and a free electron in the conduction band, due to the electron movement from the valence to conduction bands. These hole–electron pairs generate ROS when they interact with H2O or O2 [43,44]. It was described that they can cause an increase in ROS levels after exposure to UV-visible light [45]. The NBT assay in the studied samples showed that bare P25TiO2NPs produce a large amount of ROS, which is drastically reduced by functionalization with vitamin B2 (Fig. 5). This vitamin, also known as riboflavin, was discovered in 1872 as a yellow fluorescent pigment, [46] but its function as an essential vitamin for humans was established more than sixty years later, and its antioxidant capacity was not studied until the end of the XX century [47,48]. This antioxidant role in cells is partially explained because the glutathione reductase enzyme (GR) requires it for good functionality. This enzyme is the one in charge of the conversion of oxidized glutathione to its reduced form which acts as a powerful inner antioxidant and can quench the ROS [49,50]. The cost of this action is that the glutathione is converted to the oxidized form and needs to be recovered by the GR. Consequently, the cells need more vitamin B2. Another glutathione action is the protection against hydroperoxide. This activity is also mediated by riboflavin. Therefore, local delivery of this vitamin seems to significantly help the cells in their fight to keep the oxidative balance, once they are exposed to high levels of ROS.
Once the raw materials are ground to the proper size, they are subjected to a series of chemical treatments to further enhance the performance of the pigment. These treatments help to improve the dispersibility, hiding power, and brightness of the lithopone 28-30%, making it suitable for a wide range of applications.
Lithopone B301, Lithopone B311 powder is also widely applied in paints and enamels
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.