98% rutile titanium dioxide paint grade manufacturer

The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of

...

After settling, the clear solution containing the titanium oxide, is run oil andfurther processed, whereby a roduct is obtained containing approximate y 35 per cent titanium oxide, 2 per cent sulphuric acid and 63 per cent of water. This product is known in the trade as titanium acid cake. It is a plastic mags having somewhat the consistency of mu 1 ljha've discovered that lithopone can be greatly improved by the suitable use of this titanium acid cake, and that the results obtained are dependent to a large extent upon the methods'by which this titanium acid cake is used,'in the production of lithopone.

...

The Chinese titanium dioxide industry has experienced exponential growth over the past decades, accounting for a substantial portion of the global output. This boom is driven by the country's vast resources of ilmenite, a primary source of titanium, and the demand from various sectors. However, the manufacturing process of TiO2 involves large amounts of water, which can lead to potential water pollution if not managed properly.

...