titanium dioxide used in plastic manufacturers

...

Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors the pigment itself can vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant may be used, such as a small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.

...

In conclusion, the precipitation of titanium dioxide is a crucial step in the production of this widely used white pigment. Understanding the various methods and factors that influence this process is essential for optimizing production efficiency and product quality. With ongoing research and development, it is expected that new and improved precipitation techniques will emerge in the future, further enhancing the sustainability and competitiveness of TiO2 production.

...

First, the ammonia leaching method is used as a technical means for the effective treatment of acid leaching slag, and the nano nitrite powder is prepared under a weak alkaline ( Ή 8 8.5 to 10) ammonia environment. In an alkaline environment, some metal impurities such as The solubility of Ca, Mg, Fe and Al hydroxides is low, and the impurities entering the final immersion liquid in the selective leaching of ammonia-ammonium sulfate are reduced, thereby ensuring the quality of the product; the traditional acid method for preparing lithopone is because of the zinc calcination. In the roasting and reduction process of the alkalized alkali, the elemental sulfur and sulfite are more or less produced, and the prepared white powder has a yellowish color, and the metathesis reaction of the patent is carried out in an ammonia solution (alkaline). The final product obtained is sulfate, which is quickly and thoroughly added by desulfurization through 3⁄40 2 , and the whiteness of the product can be ensured without high temperature calcination; the equipment requirement is lower than that of sulfuric acid leaching, and the ordinary steel leaching tank can complete the leaching; The environmental pollution problem of acid leaching residue, especially effectively solves the environmental pollution of heavy metals such as zinc, copper, lead, cadmium and arsenic in acid leaching residue and the influence of acid ions on the storage environment. Realize the recycling of high-value metal zinc in acid leaching slag, realize the acidity improvement of soil and have the comprehensive advantages of low cost, energy saving and environmental protection.

...