Available studies in humans and postmortem analysis of tissues suggested that the oral bioavailability of titanium dioxide in humans is very low. JECFA noted that there are currently no epidemiological studies that allow any conclusions to be drawn with respect to an association between dietary exposure titanium dioxide and human health effects.

Lithopone B301, Lithopone B311 powder is widely used in coatings, printing ink, rubber, plastic industry, etc.

The morphology of vitaminB2@P25TiO₂NPs is coherent with the description of Degussa P25 typical population. Size distribution histograms were made from manual measures of the nanoparticles observed in SEM micrographs using ImageJ®. This data showed that more than 70% is anatase (between 20 and 60 nm) with a minor amount of rutile characteristic bars (between 80 and 100 nm) and a small amount of amorphous phase (<40 nm) [36]. Further analysis of the same sample areas with an EDS probe demonstrated the presence of organic material composed of C and O (Fig. 2). This material was found homogeneously distributed on the surface of the different shapes of P25TiO₂NP, not in the background, indicating a specific interaction that could be attributed to the functionalization of the P25TiO₂NPs with vitamin B2.

Algaecidal effect of Lithopon: After 5 years of exposure to weathering in Alpen (Lower Rhine)  

Demand in the European region has been significantly boosted by higher offtakes in the furniture, building, and industrial sectors compared to Q2, after a boost in containment measures. DIY activities increased significantly as people engaged in more home renovation and building tasks during the extended period of lockdown. With the restart of Chinese shipments in the latter half of Q2 2020, supply has also remained plentiful.

In a 2017 study published in Scientific Reports, researchers exposed rats to human-relevant levels of E171 to examine the effects of intestinal inflammation and carcinogenesis. They saw that “a 100-day E171 treatment promoted colon microinflammation and initiated preneoplastic lesions while also fostering the growth of aberrant crypt foci in a chemically induced carcinogenesis model.” They continued: “Stimulation of immune cells isolated from Peyer’s Patches [which are clusters of lymphoid follicles found in the intestine] showed a decrease in Thelper (Th)-1 IFN-γ secretion, while splenic Th1/Th17 inflammatory responses sharply increased,” researchers wrote. “A 100-day titanium dioxide treatment promoted colon microinflammation and initiated preneoplastic lesions.” The scientists concluded: “These data should be considered for risk assessments of the susceptibility to Th17-driven autoimmune diseases and to colorectal cancer in humans exposed to TiO2 from dietary sources.”

What Is It?

Appearance:

≤0.6

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.