estimation of sulphate as titanium dioxide manufacturers

...

Lithopone is an inorganic white pigment, obtained from co-precipitation of Zinc sulfide (ZnS) and Barium sulfate (BaSO4). As a white pigment, it acts as a cost-effective alternative for TiO2. Some of the properties of Lithopone include high brightness and performance under UV exposure. Lithopone requires less wetting agent to achieve optimum wetting of its surface. It is commercially graded on the basis of amount of ZnS. Its grades include 28%, 30%, and 60% ZnS. As a comparatively inexpensive white pigment, Lithopone is presently used in various paint formulations, road marking paints, jointing compounds, and putties.

...

Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [2124]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.

...