Titanium dioxide is typically micronized and coated for use in cosmetics products. The micronizing makes this somewhat heavy-feeling ingredient easier to spread on skin, plus a bit more cosmetically elegant. Micronized titanium dioxide is much more stable and can provide better sun protection than non-micronized titanium dioxide.
For example, they may use smaller particle sizes or encapsulate the TiO2 to reduce its potential for inhalation or ingestion For example, they may use smaller particle sizes or encapsulate the TiO2 to reduce its potential for inhalation or ingestionfood safe titanium dioxide factory.Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors the pigment itself can vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant may be used, such as a small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.
Lithopone can also be used as raw material of putty to fill gaps; Adding 20% lithopone to the concrete to make artificial quartz without harming its light resistance and solidification; It can improve the impact resistance and electrical performance when used in fire safety polyester chemicals; These are the raw materials of audio vinyl records used for turbojet engine dye and thermal insulation coating and insulating layer.