Studies have been carried out with both emulsion paints and powder paints, both with clear results on how the use of lithopone supplier 30% reduces the appearance of algae in the paint once it has been applied (see photos). 

Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors the pigment itself can vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant may be used, such as a small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.

All samples (n = 6) were irradiated in a 96 well plate using an LED panel on top for 3 and 6 h before analysis. An identical set of samples were kept in the dark as controls. The temperature was checked and did not go over 37 °C. The intensity of light was also measured and was constant at 19,500.10 lux. (43.33 W in 0.2 m²), about 5 times less than actual solar light intensity on Earth's surface Therefore, these findings are indicative of even greater danger in real life.

While loose titanium dioxide presents a problem, titanium dioxide within sunscreen formulations presents a much safer option than conventional sunscreen chemicals like oxybenzone and octinoxate. However, titanium dioxide may become dangerous when it is nanoparticle size. Generally, nanoparticles can be 1000 times smaller than the width of a human hair. Despite nanoparticles becoming increasingly common across industries, they have not been properly assessed for human or environmental health effects, nor are they adequately regulated. Researchers don’t quite understand the impacts nanoparticles could have on human health and the environment. However, because of their infinitesimally small size, nanoparticles may be more chemically reactive and therefore more bioavailable, and may behave differently than larger particles of the same substance; these characteristics may lead to potential damage in the human body or ecosystem.

Chloride process. This process requires a high titanium feedstock. Rutile is reacted with hydrochloric acid to produce titanium tetrachloride, which can be hydrolyzed with steam or oxidized with air to render the dioxide. A rutile form of titanium dioxide is obtained.