tio2 r902

The production process within these factories is intricate and requires precise control over chemical reactions. First, the raw rutile ore is extracted from mines and then crushed into a fine powder. This powder undergoes a series of leaching processes to remove impurities. Afterward, it is subjected to the chlorination process, where it reacts with chlorine gas at high temperatures to produce titanium tetrachloride. This compound is then refined further through vapor deposition or oxidation to yield high-purity titanium dioxide.

...

The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of

...