chemical pigment manufacturer



Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.

Storage safety properties

PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.

Solubility

PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;

PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.

Viscosity characteristics of PVB solution

The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;

Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.

Dissolution method of PVB

Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,

At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.

The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.

Processing properties

Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.

The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.

Compatibility

PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.

B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.

...
chemical pigment manufacturer2025-08-16 06:52
1351

Wholesale suppliers of these paints cater to a wide range of needs, from small-scale local contractors to large-scale international projects. They understand the importance of providing high-quality, cost-effective solutions that meet the stringent standards of road safety. These paints are available in various colors and formulations, allowing flexibility in design and functionality. For instance, they can be formulated to glow in the dark, enhance visibility during rainy conditions, or contain reflective particles for improved nighttime navigation.

...
chemical pigment manufacturer2025-08-16 05:41
1301

Rutile, the most common form of titanium dioxide, is a reddish-brown pigment with a high refractive index and excellent weathering resistance. It is mainly used in paints, coatings, plastics, and paper industries due to its ability to provide excellent whiteness, opacity, and UV protection. Rutile titanium dioxide is typically produced by the sulfate process, which involves the reaction of titanium ore with sulfuric acid to produce titanium sulfate. The resulting solution is then treated with ammonia to precipitate titanium hydroxide, which is subsequently calcined at high temperatures to obtain rutile titanium dioxide.

...
chemical pigment manufacturer2025-08-16 04:27
201

  •  

  • Standard 3760/3761

  • Materials Used in Metal-to-Oil Seals

  • Oil seals, which are also known as rotary shaft seals, fluid seals or grease seals, play an important role in closing down the gaps between moving and stationary elements of mechanical equipment.

  • Oil seal: get to know all the details about this timing chain kit component

  • SG
  • A strike plate is used for precise control over the seal installation depth and alignment, particularly useful for larger seals. Slow, controlled movements are vital to ensure correct placement and prevent distortion.
  • ordinary fluorine rubber, but are 10 times as high as fluorine rubber.
  • Another important consideration is the compatibility of the main bearing oil seal with the engine's oil. The seal must be designed to withstand the chemical properties of the oil, such as its viscosity and additives, without deteriorating. Using the wrong type of oil can cause the seal to fail prematurely. Therefore, it is essential to use the recommended oil type for your engine to ensure the longevity and reliability of the main bearing oil seal.
  • **Conclusion

  • 6. Check for Leaks

  • Our commitment to quality starts with sourcing only the best materials for our valve cover gaskets. We use materials that are resistant to heat, oil, and other harsh conditions commonly found in engines. This ensures that our gaskets can withstand the rigors of daily use and provide long-lasting performance.

  •  

  • In conclusion, LS1 spark plug wires play a crucial role in the performance and reliability of an LS1 engine. Choosing high-quality wires and ensuring proper installation and maintenance are essential for optimal engine performance. By investing in quality spark plug wires and taking care of them properly, LS1 owners can enjoy a smooth-running engine with maximum power and efficiency.
  • OEM Spark Plugs Revolutionizing the Automotive Industry

  •  

  • Choosing the right oil seal

  • One of the key benefits of the a7tc spark plug is its ability to provide a strong and consistent spark, which is essential for igniting the air-fuel mixture in the engine. This reliable ignition can lead to smoother starts, improved engine performance, and better fuel efficiency.
  • One of the key challenges in the design and manufacture of oil seals is achieving a balance between sealing effectiveness and friction. While a tight seal is essential to prevent oil leakage, excessive friction can lead to increased heat generation, wear, and ultimately, failure of the seal While a tight seal is essential to prevent oil leakage, excessive friction can lead to increased heat generation, wear, and ultimately, failure of the seal While a tight seal is essential to prevent oil leakage, excessive friction can lead to increased heat generation, wear, and ultimately, failure of the seal While a tight seal is essential to prevent oil leakage, excessive friction can lead to increased heat generation, wear, and ultimately, failure of the sealindustrial oil seals. Therefore, engineers must carefully select materials and designs that minimize friction while still providing an effective seal.

  • Oil seal material

  • The spark plug ignition coil works by converting the low voltage electricity from the battery into a much higher voltage that is capable of creating a spark across the spark plug gap. This high voltage is delivered to the spark plug through the ignition coil wire, which is connected to the secondary winding of the ignition coil.


  • The 14x22x5 oil seal has several key features that make it suitable for various applications
  • In conclusion, there are several different types of spark plugs available, each with its own advantages and disadvantages. Choosing the right spark plug for your vehicle can improve performance, fuel efficiency, and overall engine health. Whether you drive a daily commuter car or a high-performance sports car, selecting the right spark plug is essential for optimal engine performance.

  • In motor vehicles, spark plugs play a critical role in igniting the air-fuel mixture within the engine cylinders. High-quality iridium spark plugs are designed to provide reliable ignition, efficient combustion, and consistent performance, contributing to the overall efficiency and longevity of the vehicle. The use of iridium spark plugs in motor vehicles can lead to improved throttle response, smoother acceleration, and reduced emissions, enhancing the driving experience and environmental impact.

  • The LS3 Valve Cover Gasket, a seemingly insignificant component in the grand scheme of a high-performance engine, plays a pivotal role in ensuring optimal functionality and longevity. This small but crucial element is specifically designed for Chevrolet's LS3 engine, a powerhouse found in various vehicles including Corvettes, Camaros, and Holden Commodores.
  • The oil gasket is typically made of a durable material such as rubber or silicone that can withstand the high temperatures and pressures found in an engine. Over time, however, the gasket can wear out and become damaged, leading to oil leaks and other problems. It is important to regularly inspect the oil gasket and replace it if necessary to ensure the proper functioning of the engine.

  • In addition to their reliability and durability, floating oil seals are also easy to install and maintain. These seals do not require complex installation procedures or special tools, making them a cost-effective solution for businesses looking to minimize downtime and reduce maintenance costs. With proper care and regular inspection, floating oil seals can continue to provide effective sealing performance for years to come.


  • When shopping for new spark plugs, it's important to consider the type of spark plugs that are recommended for your specific vehicle. There are different types of spark plugs, such as copper, platinum, and iridium, each offering different levels of performance and durability. Your vehicle's owner's manual or a professional mechanic can help you determine which type of spark plugs are best suited for your car.
  • Diesel spark plugs are made of durable materials such as platinum or iridium, which can withstand the extreme conditions inside a diesel engine. These materials are able to resist heat and pressure much better than traditional spark plug materials like copper or nickel. This allows diesel spark plugs to have a longer lifespan and provide more reliable ignition.
  • Another benefit of neoprene rubber gaskets is their excellent chemical resistance. They can effectively seal against a wide variety of chemicals and fluids, including acids, alkalis, and hydrocarbons. This makes them an ideal choice for applications in the chemical processing, automotive, and marine industries, where exposure to corrosive substances is common.
  • 1

  • Oil seals, also known as rotary shaft seals, are a type of gasket used to prevent lubricant leakage and contamination in rotating machinery by creating a barrier between the moving and stationary parts.

  • Spark plug replacement is an essential aspect of routine car maintenance that often goes unnoticed until it becomes a problem. Spark plugs, the small but mighty components in your vehicle's engine, play a pivotal role in igniting the air-fuel mixture, thereby enabling your car to run smoothly. Over time, these plugs can wear out or become dirty, leading to reduced efficiency and performance.
  • column_04_01_13_HMSAH.jpg