Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Silicone intake hoses have become increasingly popular in automotive applications ranging from everyday vehicles to high-performance race cars. In standard cars, they ensure reliable operation of the engine's intake system, contributing to optimal fuel efficiency and emissions control.

- Construction Within the construction sector, suction hoses are vital for pumping out water from excavation sites, transporting slurries, and for various concrete mixing applications. Their robust nature ensures that they can handle rough handling and challenging environments.

In the world of automotive and machinery applications, the importance of efficient and reliable oil delivery cannot be overstated. One of the key components that ensure optimal performance in these systems is the oil line. Among the various materials available for manufacturing oil lines, stainless steel braided oil lines have emerged as a superior choice for many reasons. This article explores the benefits of stainless braided oil lines, shedding light on their structure, performance, durability, and applications.

The automotive industry also benefits from hydraulic hose hand crimpers. They are used to create and repair hoses for brake systems, power steering, and transmissions. The ability to work with hydraulic hoses directly contributes to vehicle safety and reliability, making it imperative for mechanics to have access to quality hand crimpers.

2. Store Properly Coil the hoses neatly and store them in a cool, dry place away from direct sunlight. Avoid leaving them in environments where they might be exposed to extreme temperatures or chemicals.

1. 1% High Pressure Hoses A hose rated for 1% high pressure typically indicates that the hose can handle pressures slightly above atmospheric levels, often used in applications requiring light-duty operation. These hoses may be used in situations where precision and careful handling of fluids are essential, such as laboratory settings or low-pressure hydraulic systems.

4. Dấu hiệu cho thấy ống điều hòa cần được thay thế

SAE 100R2AT is a hydraulic hose specification developed by the Society of Automotive Engineers (SAE). It is primarily designed for high-pressure hydraulic applications. The R2 indicates that it is a two-wire braided hose, while the AT signifies that it is designed to be used with oil-based hydraulic fluids.

High-pressure hoses with 1% and 4% ratings have diverse applications across various industries

Sandblast rubber hoses are engineered specifically to convey abrasive materials, such as sand or other grit, during the sandblasting process. They possess unique properties that allow them to resist wear and tear, ensuring a longer lifespan compared to standard hoses. Typically composed of high-quality rubber materials, these hoses are reinforced with layers of fabric or steel for added durability and flexibility. Their robust construction minimizes the risk of ruptures or damage when subjected to high pressure and abrasive materials.

- Agriculture In farming, suction hoses are used to transfer water from irrigation sources to crops. They enable efficient water distribution, especially in large-scale farming operations where water needs to be drawn from wells or reservoirs.

Additionally, manufacturers are developing hoses that can withstand extreme conditions, such as those found in high-temperature or corrosive environments. The use of advanced materials and engineering techniques allows for the production of hoses that offer superior performance and longevity.

Applications Across Industries

Furthermore, the durability of hydraulic hoses is another critical aspect that cannot be overlooked. Industrial operations often involve harsh environments, exposure to chemicals, extreme temperatures, and heavy mechanical stress. Quality hydraulic hoses are designed to withstand these challenging conditions, ensuring that they can endure the rigors of daily use without deteriorating prematurely. This durability not only contributes to the longevity of the hoses but also minimizes the need for frequent replacements, ultimately reducing maintenance costs for industrial businesses.

A hydraulic oil hose is a flexible tube that conveys hydraulic fluid in a hydraulic system. These hoses are specifically engineered to withstand high pressure and extreme temperatures. They typically consist of three main components the inner tube, the reinforcement layer, and the outer cover. The inner tube is made from materials that resist high temperatures and the corrosive nature of hydraulic fluids. The reinforcement layer, often made from steel wire, provides strength and durability, while the outer cover protects against abrasion and environmental factors.

Using a hydraulic hose crimper offers several advantages

Key Features

1. Leaking Brake Fluid If you notice fluid pooling beneath your vehicle or on the hoses themselves, it may indicate a brake hose leak. This is particularly dangerous, as low brake fluid levels can lead to brake failure.

3. Reinforced Hoses Equipped with multiple layers of reinforcement, these hoses are built to withstand intense pressure and are often used in heavy-duty applications.

2. Agricultural Machinery Tractors and other farm equipment rely on these hoses to perform tasks such as plowing, planting, and harvesting efficiently. The robustness of the 5 8 hose ensures that it can withstand abrasive materials and fluctuating pressure levels typical in agricultural environments.

1. Material Composition The materials used in manufacturing pump suction hoses can significantly impact their performance. Rubber hoses are generally more flexible and resistant to abrasion, while PVC hoses offer better UV protection and are often semi-rigid. The choice of material largely depends on the specific application and environmental conditions.

Considerations When Choosing a Braided Hose