On some engines you have to remove the clutch-housing cover to reach the rear nuts.

In recent research, MWCNTs and carbon black were mixed with the butadiene/natural rubber to form a hybrid composite which gives very strong filler links by partial replacement of carbon black based on the m₁:m₂:X (m₁—MWCNT; m₂—reduction amount of carbon black; X-varies from 1 to 6) [40,64]. An internal blending mixer and two-roll milling were used to formulate the composites. The synergistic effect plays a major role in improving the abrasion resistance property due to the partial replacement of carbon black by adding MWCNTs in different ratios. The optimal ratio value of MWCNTs is 5 (parts per hundred of rubber) and 27.5 (parts per hundred of rubber) for carbon black with better resistant to abrasion compared to the matrix material [64]. The vulcanized hybrid composite material reinforced with MWCNT/carbon black at the ratio of 1:1 shows better mechanical properties, curing characteristics, and thermal conductivity. This shows a better tyre thread with an improved endurance life, less curing time, and improved thermal conductivity [42,64]. Fig. 4.4 shows the SEM and TEM images of uncured and cured rubber and Figs. 4.5 and 4.6 show the application of rubber nanocomposites in a tyre application.

Corteco