One of the key responsibilities of titanium dioxide manufacturers is to produce high-quality products that meet the stringent requirements of their customers. This involves carefully sourcing raw materials, employing efficient production processes, and conducting rigorous quality control measures to ensure that the final product meets the necessary specifications.
Packaging containing this additive has been shown to decrease ethylene production in fruit, thus delaying the ripening process and prolonging shelf life (4Trusted Source).
Here, NaOH or NH3 · H2O is used as a precipitant or pH regulator to react with FeSO4 to form ferrous hydroxide precipitation; Air is used as oxidant; The iron sheet reacts with sulfuric acid produced during the oxidative hydrolysis of FeSO4 to provide ferrous ions required in the reaction system and maintain the pH value of the solution. The alkali consumption of acid method is less and the particles are easy to wash. The relative rates of seed preparation and crystal growth determine the particle size, particle size distribution and particle morphology of iron yellow particles.
③ Paper making industry: Paper making and paper products industry is the third largest application industry of titanium dioxide. Paper using titanium dioxide has good whiteness, high strength, luster, thin and smooth, and is not easy to penetrate when printing. Under the same conditions, the opacity is 10 times higher than that of paper using calcium carbonate and talc powder, and the weight can also be reduced by 15% to 30%. The amount of titanium dioxide in decorative paper accounts for 20%~40% of its raw materials, and the amount of titanium dioxide in other papers is about 1%~5%. Due to the continuous adjustment of the industrial structure of the paper products industry from 2016 to 2018, according to the data of China Paper Association, the output of China's paper products in 2019 was 72.19 million tons, a significant year-on-year increase of 29.4%, and the use of titanium dioxide increased significantly.
Used for paint, ink, rubber, polyolefin, vinyl resin, ABS resin, polystyrene, polycarbonate, paper, cloth, leather,enamel, etc. Used as a binder in buld production.
Package and Storage:
25KGs /5OKGS Woven bag with inner, or 1000kg big woven plastic bag.
The product is a kind of white powder which is safe , nontoxic and harmless.Keep from moisture duringtransport and should be stored in a cool, dry condition.Avoid breathing dust when handling, and wash withsoap & water in case of skin contact.For more details.
The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of