Titanium dioxide (TiO₂) is by far the most suited white pigment to obtain whiteness and hiding power in coatings, inks and plastics. This is because it has an extremely high refractive index and it does not absorb visible light. TiO₂ is also readily available as particles with the right size (d ≈ 280 nm) and the right shape (more or less spherical) as well as with a variety of post-treatments.

However, the pigment is expensive, especially when the volume prices of systems are used. And, there always remains a need to develop a full-proof strategy to obtain the best results in terms of cost/performance ratio, scattering efficiency, dispersion… while using it in coating formulations. Are you searching for the same?

Explore the detailed knowledge of TiO₂ pigment, its scattering efficiency, optimization, selection, etc. to achieve the best possible white color strength and hiding power in your formulations.

Further outstanding properties of Lithopone are its high lightness, neutral white colour and its diffuse reflectance in the near UV range.

Titanium dioxide is used in an enormous range of food products, which can feel jarring when looking at some of its other uses.

Food safety experts in the European Union (EU) have recently updated their safety assessment of TiO₂ as a food additive. In Europe, TiO₂ is referred to as E171, in accordance with European labelling requirements for food additives. The EU expert panel took into account toxicity studies of TiO₂ nanoparticles, which to this point had not been considered relevant to the safety assessment of TiO₂ as a food additive.  

Titanium Dioxide is largely produced by the reduction of titanium tetrachloride, obtained in turn from chlorination of natural rutile, synthetic rutile derived from ilmenite or even slags rich in TiO2 produced by metallurgical treatment of ilmenite. TiO2 is also manufactured by treatment of ilmenite with sulfuric acid. Raw materials and the respective production processes employed in the manufacturing of Titanium Dioxide are listed below.

The alarming fact of this study is that it was only conducted for 100 days, I have been wearing makeup daily for at least the last fifteen years & would have eaten kilo's of lipstick in my life time - what effects has this had on my system & health??

Reacting to the report, France’s ministers of health, agriculture and economy instructed the country’s food health and safety agency, Anses, to investigate whether the additive poses a risk for human health.

The study was said to be prompted by “growing concerns that daily oral… Intake is associated with an increased risk of chronic intestinal inflammation and carcinogenesis”, or cancer formation”.

The produced barium sulfide enters the leacher, and the temperature is controlled above 65°C to obtain a barium sulfide content of 70%, and then enters the clarification barrel, add zinc sulfate for reaction after clarification, control the zinc sulfate content to be greater than 28%, pH=8~9, and obtain a mixture of barium sulfate and zinc sulfide with a density of 1.296~1.357 g/cm3.

6. What happens next?

Developing new Lithopone formulations, one that enhances the properties of the existing Lithopone is anticipated to boost the demand for Lithopone white pigment during the forecast period. Reinforced Lithopone is one such development, wherein a copolymer is added to the polymerization reaction to yield Lithopone with increased weather resistance. Moreover, development of nano-scale Lithopone is anticipated to attract market interest during the forecast period.