titanium dioxide used in rubber manufacturers

One of the most significant uses of titanium dioxide is in the production of paints and coatings. It acts as a pigment that provides brightness, opacity, and durability to the final product. The high refractive index of titanium dioxide allows it to scatter light effectively, making it ideal for creating opaque finishes. Moreover, its chemical stability ensures that the color remains consistent over time, even when exposed to harsh environmental conditions.

...

titanium oxide and 2 per cent' sulphuric acidand 63 per cent water, are slowly added to a solution containing 1050 pounds of barium sulphide, held in a large cylindrical tank, provided with a rotary agitation :capable of producing rapid agitation. The mass isthus v rapidly agitated, and the 2 per cent of sulphuric acid contained in the titanium acid cake reacts with a small portion of the barium sulphide. This reaction may be represented by the following equation TiO H 80 The free sulphuric acid of the titanium acid cake is neutralized by thebarium sul-' phide solution, forming barium sulphate and hydrogen sulphide, as indicated by the above equation. As the sulphuric acid is present only in a small percentage, the major porltiion of the barium sulphide remains as suc very fine colloidal suspension. The barium sulphate produced is also very fine, and the presence of this. very fine barium sulphate in suspension, and also of the very fine colloidal titanium oxide, is believed to be the explanation of the great improvement in the properties of the finished lithopone.

...

In conclusion, P25 titanium dioxide is a versatile and essential ingredient in manufacturing, offering a range of benefits for various industries. Its unique properties, such as UV protection, photocatalytic activity, and excellent dispersibility, make it a valuable addition to many products. With the right supplier and attention to detail, manufacturers can harness the full potential of P25 TiO2 to create high-quality, durable, and environmentally friendly products.

...

Natural barite and anthracite containing more than 95% barium sulfate are mixed and fed at a ratio of 3:1 (mass). After being crushed to a diameter of less than 2cm, it enters the reduction furnace. The furnace temperature is controlled to be 1000-1200°C in the front section and 500-500 in the back section. 600°C, the reduction furnace rotates at a speed of 80 seconds per revolution, and the reaction conversion rate is 80% to 90%.

...
{随机栏目} 2025-08-14 15:51 172