china 30-50nm tio2 powders
Asia
In the same year (2019), the Netherlands Food and Consumer Product Safety Authority (NVWA) also delivered an opinion on possible health effects of food additive titanium dioxide, which highlighted the importance of examining immunotoxicological effects in addition to potential reprotoxicological effects.
In addition to pigments and sunscreens, titanium dioxide is also used in the production of paper, food products, and pharmaceuticals. In the paper industry, titanium dioxide is added to paper coatings to improve brightness, smoothness, and printability. In the food industry, titanium dioxide is used as a whitening agent in products such as candies, chewing gum, and icing. In the pharmaceutical industry, titanium dioxide is used as a coloring agent in tablets and capsules.
use of titanium dioxide manufacturers

3) Metathesis reaction: Dissolve the sulfide in distilled water to obtain a clear decomposition liquid, and add nonionic surfactant to stir evenly, then slowly add it to the zinc sulfate ammonia complex solution to form a metathesis reaction, and obtain Lide powder opacity. The liquid is separated by filtration, and the separated ammonia liquid is returned to the leaching after ammonia adjustment, and the separated nZnS-BaS0 4 crystal filter cake is put into the next step;
Developing new Lithopone formulations, one that enhances the properties of the existing Lithopone is anticipated to boost the demand for Lithopone white pigment during the forecast period. Reinforced Lithopone is one such development, wherein a copolymer is added to the polymerization reaction to yield Lithopone with an increased weather resistance and an anti-ultraviolet property. Moreover, development of nano-scale Lithopone is also anticipated to attract market interest during the forecast period.
Inner wall coating factories are continuously working to develop new and improved coatings that meet the growing demand for eco-friendly and sustainable products
The FDA categorized titanium dioxide as “Generally Recognized as Safe,” but there are warnings about its potential dangers from other organizations.
...
2025-08-15 03:04
2744
The demand for transparent TiO2 has been steadily increasing as manufacturers seek to develop products with improved aesthetics and functionality
...
2025-08-15 02:51
2973
- When the power steering pump is engaged, it draws oil from the engine and pressurizes it, creating the necessary force to assist in turning the steering wheel. This high-pressure fluid flows through the hose, where it encounters restrictive passages in the steering rack or valve, converting mechanical effort into effortless motion. If the pressure hose is compromised, this conversion could be disrupted, leading to stiff steering or even complete failure of the power steering.
- 1. **Threaded Couplings** These couplings have male and female threads at each end, allowing them to be connected to pipes with matching threads. They are suitable for connecting pipes of the same material but different diameters.
- A sewer jetter, by its very name, combines the power of water pressure with the agility of a hose to clear out the intricate passages of our underground drainage systems. These systems, which are the veins of modern civilization, can easily become clogged with debris, grease, and other solid waste. Without proper maintenance, these blockages can lead to severe backups, environmental hazards, and even public health issues.
- In conclusion, hose guards from Home Depot are a testament to the retailer's commitment to providing practical and stylish solutions for homeowners. They are a testament to how even the smallest details can make a big difference in enhancing the functionality and beauty of our outdoor spaces. So, the next time you're planning your garden upgrade or simply seeking to organize your hose, remember to explore the vast selection of hose guards available at Home Depot – a small investment that yields big returns on comfort, convenience, and curb appeal.
- Understanding the Significance of 16mm Power Steering Hose in Automotive Engineering
- Some modern vehicles, particularly those with more complex steering systems like those found in larger trucks or SUVs, might have additional hoses or lines for specific functions
how many power steering hoses are there. For instance, some may incorporate a return hose that helps to maintain fluid flow and pressure balance. Others might have a bypass hose that allows fluid to circulate when the steering wheel is not being turned, reducing wear on the system. - When it comes to repair, the process depends on the severity of the issue
- In conclusion, the power steering hose replacement in a Toyota Highlander is a significant maintenance task that contributes to the overall safety and performance of the vehicle. By following the right steps and using the correct tools, you can keep your SUV's steering system in top condition, ensuring many miles of trouble-free driving.
- In some cases, DIY repairs might seem appealing to save money. However, unless you have experience and the proper tools, it's highly recommended to leave power steering hose repairs to professionals. Mishandling the system can lead to further damage or even personal injury.
- If you own a 2006 Honda Accord, it's advisable to check your power steering hose periodically for signs of wear, such as cracking, swelling, or leaks. A slight hissing sound while turning could indicate a worn hose. If you notice any of these symptoms, it's best to consult a professional mechanic who specializes in Honda vehicles. Early detection and replacement can save you from costly repairs down the line.
- When it comes to repairing a high-pressure power steering hose, the cost can vary depending on several factors. The first factor is the location of the leak or damage. If the hose needs to be replaced due to a small crack or puncture, the cost may be relatively low, ranging from $100 to $300. However, if the hose needs to be replaced due to extensive damage or wear and tear, the cost could be higher, ranging from $300 to $800.
- 3. **Compound Couplers** Compound couplers are designed for applications where temperature and pressure fluctuations are common. They are made with a compound that expands and contracts with changes in temperature, ensuring optimal performance in various conditions.
- Power steering hoses are crucial components in modern vehicles, responsible for transmitting power from the engine to the steering system. Over time, these hoses can become worn or damaged, leading to leaks and reduced performance. Flex tape is a popular solution for repairing or reinforcing these hoses, providing a quick and effective fix. In this article, we'll explore the benefits of using flex tape on power steering hoses and provide step-by-step instructions for applying it correctly.
- In conclusion, coupling for plumbing is a specialized art form that demands attention to detail and an understanding of various materials and techniques. By choosing the right type of coupling and ensuring proper installation and maintenance, plumbers can create reliable connections that stand the test of time, preventing leaks and ensuring the efficient operation of plumbing systems.
- **Repairing Jet Wash Hoses
- However, it's important to note that while a 300% power steering hose can significantly enhance the performance, it also requires regular maintenance and timely checks. Any sign of leaks, swelling, or hardening could be an indication of potential issues that need immediate attention. Regular inspections and prompt replacement when necessary can prevent more significant problems and prolong the life of the hose.
- The 4 Inch Waste Coupling A Crucial Component in Industrial Efficiency
- In conclusion, the power steering hose is a critical component of the John Deere 455's power steering system. Regular maintenance and timely replacement of the power steering hose can help ensure smooth and efficient operation of your tractor. By following the steps outlined above, you can easily replace the power steering hose on your John Deere 455 and keep your tractor running smoothly for years to come.
- To fix a power steering hose leak in your Nissan Titan, the damaged hose will need to be replaced. Depending on the extent of the leak, you may also need to have the power steering system flushed and refilled with fresh fluid. It's essential to have this repair done by a qualified mechanic to ensure it's done correctly and safely.
- After selecting the new hose, prepare the area for installation by cleaning the connection points and applying a small amount of clean engine oil to the hose fittings

- Next, the mechanic selects the appropriate crimping die for the specific size and type of hose being worked on. The die is then placed in the crimper, and the hose is inserted into the die with the end that requires crimping facing outward.
- The 25mm hose pipe connector comes in two primary types slip-on connectors and threaded connectors. The slip-on connector, as the name suggests, slides onto the end of the hose or pipe, while the threaded connector requires the use of a nut to secure it in place. Each type has its own set of advantages and is suited to different situations.
By paying attention to these installation guidelines, you can help ensure the air conditioning system in the bus functions efficiently, providing passengers with a comfortable and pleasant ride.
- Repairing a car's AC rubber hose is a relatively straightforward process, but it's important to have the job done by a professional to ensure that it's done correctly. The first step in repairing the hose is to diagnose the source of the problem. This may involve pressurizing the AC system to locate the leak or visually inspecting the hose for damage. Once the issue has been identified, the damaged section of the hose will need to be replaced Once the issue has been identified, the damaged section of the hose will need to be replaced
Once the issue has been identified, the damaged section of the hose will need to be replaced Once the issue has been identified, the damaged section of the hose will need to be replaced
car ac rubber hose repair. - The power steering hose diagram for a Dodge Ram 1500 typically shows the power steering pump at one end of the hose, connected to the steering gear at the other end. The hose is made of high-quality rubber or metal, designed to withstand the high pressures generated by the power steering system. Over time, however, the hose can become damaged due to wear and tear, heat, or exposure to chemicals and contaminants.
- Moreover, brake line hose kits contribute to overall vehicle safety

- Crafted from premium materials, the Gen 202 power steering hose boasts improved flex life and resistance to heat, ozone, and various fluids. Its construction incorporates advanced polymers and reinforced layers that prevent cracking and leakage, which are common issues in older hose models. This results in reduced maintenance costs and extended service intervals for vehicle owners.
- In conclusion, the power steering hose is an essential part of the 2005 Nissan Altima's steering system, and it's important to replace it promptly if it becomes damaged or worn. By following these simple steps, you can keep your vehicle running smoothly and avoid costly repairs down the line.
- In the realm of plumbing and construction, the role of corrugated pipe couplings is indispensable, particularly the 4 variety. These specialized connectors play a pivotal part in joining pipes, ensuring the seamless flow of liquids or gases while providing structural integrity to the piping system. This 4 corrugated pipe coupling, with its unique design and functionality, has proven to be a game-changer in various industries.
- 2. Drain the power steering fluid from the system. You can do this by removing the reservoir cap and allowing the fluid to drain out.
- A pressure washer sewer jetter is a powerful tool used for cleaning out sewer lines and drains. It combines the high-pressure water stream of a pressure washer with a specialized nozzle designed to clean out debris and blockages from pipes. This tool is a must-have for anyone who deals with clogged drains or sewer lines on a regular basis.
- On average, a well-maintained power steering hose can last anywhere between 50,000 to 100,000 miles or about 7 to 14 years, depending on various factors. This lifespan can vary significantly based on driving conditions, usage patterns, quality of the hose, and regular maintenance practices.
- Brake hose replacement is an essential aspect of automotive maintenance that often goes overlooked until a problem arises. The brake system in a vehicle is a complex network of components, and the brake hoses play a pivotal role in ensuring the efficient and safe functioning of this system.
Qirui Te was founded with an investment of 78 million yuan, with a factory area of more than 16,000 square meters and more than 100 employees, is a well-known auto parts manufacturer mainly producing automotive air conditioning hoses.
- Rubber is the preferred material for power steering hoses because of its durability and flexibility. Rubber hoses can withstand high pressures and temperatures, making them ideal for handling the hydraulic fluid used in power steering systems. Additionally, rubber hoses can bend and flex without cracking or breaking, ensuring reliable performance over time.
- Another advantage of using a pressure washer sewer drain cleaning hose is its efficiency
- In the world of pipe fittings and plumbing systems, the 40mm solvent weld straight connector stands as an essential component, offering robust and reliable connections. This article delves into the intricacies of this tool, its purpose, usage, and the benefits it brings to various applications.
- Fortunately, repairing air conditioning pipes is a relatively straightforward process that can be performed by a qualified mechanic. The first step is to diagnose the problem by checking the pressure and temperature readings of the system. This will help identify any leaks or blockages in the pipes This will help identify any leaks or blockages in the pipes
This will help identify any leaks or blockages in the pipes This will help identify any leaks or blockages in the pipes
car air con pipe repair. Once the source of the problem is identified, the damaged section of the pipe can be replaced or repaired using specialized tools and materials. - 2. Remove the old power steering hose First, you will need to drain the power steering fluid from the system. You can do this by removing the cap from the power steering reservoir and using a turkey baster or suction tool to remove the fluid. Once the fluid is drained, you can loosen the clamps or fittings that hold the power steering hose in place and remove the hose from the vehicle.
- Using a stop leak for power steering hoses is typically a straightforward process

stop leak for power steering hose. Most products come in a liquid form and can be easily added to the power steering fluid reservoir. The stop leak will then circulate through the system and find and seal any leaks in the power steering hoses. - A 3 inlet hose connector is a crucial component in many plumbing systems. This connector is designed to connect a 3 inlet hose to a water source, allowing for efficient water flow and distribution. Whether you are a homeowner looking to upgrade your plumbing system or a professional plumber in need of high-quality connectors, a 3 inlet hose connector is a reliable and durable option.
- When choosing a sewer jetter pressure washer, it is important to consider the size and power of the equipment needed for the job. Smaller residential models are available for occasional use, while larger commercial units are designed for heavy-duty cleaning tasks. It is also essential to follow safety guidelines and wear proper protective gear when operating a sewer jetter, as the high-pressure water can cause injury if not used correctly.
- 4

- One of the key benefits of using Earl's Power Steering Hose Kit is its universal fit design. This means that the kit can be used on a wide range of vehicles, regardless of their make, model, or year. Whether you drive a car, truck, SUV, or van, Earl's Power Steering Hose Kit has got you covered.
- 8. **Bleed the System** Start the engine and let it idle for a few minutes. Turn the steering wheel gently back and forth until the fluid runs clear. This will remove any air bubbles from the system.
- 2. Difficulty steering The steering wheel may feel heavier or more rigid, especially when turning at low speeds.
- Moreover, the quality of the 22mm nail clipper often reflects in its performance
- Upgrading to a new e46 power steering hose kit brings several advantages
- If you suspect that your Acura MDX's power steering hose is in need of replacement, there are a few signs to look out for. One common indicator is a loss of power steering fluid, which may be visible as puddles underneath the vehicle or as low fluid levels in the power steering reservoir. You may also notice difficulty steering, especially at lower speeds or when turning the wheel. In some cases, you may hear a whining or groaning noise when turning the steering wheel, which can also be a sign of power steering hose issues.
The demand for transparent TiO2 has been steadily increasing as manufacturers seek to develop products with improved aesthetics and functionality
- When the power steering pump is engaged, it draws oil from the engine and pressurizes it, creating the necessary force to assist in turning the steering wheel. This high-pressure fluid flows through the hose, where it encounters restrictive passages in the steering rack or valve, converting mechanical effort into effortless motion. If the pressure hose is compromised, this conversion could be disrupted, leading to stiff steering or even complete failure of the power steering.
- 1. **Threaded Couplings** These couplings have male and female threads at each end, allowing them to be connected to pipes with matching threads. They are suitable for connecting pipes of the same material but different diameters.
- A sewer jetter, by its very name, combines the power of water pressure with the agility of a hose to clear out the intricate passages of our underground drainage systems. These systems, which are the veins of modern civilization, can easily become clogged with debris, grease, and other solid waste. Without proper maintenance, these blockages can lead to severe backups, environmental hazards, and even public health issues.
- In conclusion, hose guards from Home Depot are a testament to the retailer's commitment to providing practical and stylish solutions for homeowners. They are a testament to how even the smallest details can make a big difference in enhancing the functionality and beauty of our outdoor spaces. So, the next time you're planning your garden upgrade or simply seeking to organize your hose, remember to explore the vast selection of hose guards available at Home Depot – a small investment that yields big returns on comfort, convenience, and curb appeal.
- Understanding the Significance of 16mm Power Steering Hose in Automotive Engineering
- Some modern vehicles, particularly those with more complex steering systems like those found in larger trucks or SUVs, might have additional hoses or lines for specific functions
how many power steering hoses are there. For instance, some may incorporate a return hose that helps to maintain fluid flow and pressure balance. Others might have a bypass hose that allows fluid to circulate when the steering wheel is not being turned, reducing wear on the system.
- When it comes to repair, the process depends on the severity of the issue
- In conclusion, the power steering hose replacement in a Toyota Highlander is a significant maintenance task that contributes to the overall safety and performance of the vehicle. By following the right steps and using the correct tools, you can keep your SUV's steering system in top condition, ensuring many miles of trouble-free driving.
- In some cases, DIY repairs might seem appealing to save money. However, unless you have experience and the proper tools, it's highly recommended to leave power steering hose repairs to professionals. Mishandling the system can lead to further damage or even personal injury.
- If you own a 2006 Honda Accord, it's advisable to check your power steering hose periodically for signs of wear, such as cracking, swelling, or leaks. A slight hissing sound while turning could indicate a worn hose. If you notice any of these symptoms, it's best to consult a professional mechanic who specializes in Honda vehicles. Early detection and replacement can save you from costly repairs down the line.
- When it comes to repairing a high-pressure power steering hose, the cost can vary depending on several factors. The first factor is the location of the leak or damage. If the hose needs to be replaced due to a small crack or puncture, the cost may be relatively low, ranging from $100 to $300. However, if the hose needs to be replaced due to extensive damage or wear and tear, the cost could be higher, ranging from $300 to $800.
- 3. **Compound Couplers** Compound couplers are designed for applications where temperature and pressure fluctuations are common. They are made with a compound that expands and contracts with changes in temperature, ensuring optimal performance in various conditions.
- Power steering hoses are crucial components in modern vehicles, responsible for transmitting power from the engine to the steering system. Over time, these hoses can become worn or damaged, leading to leaks and reduced performance. Flex tape is a popular solution for repairing or reinforcing these hoses, providing a quick and effective fix. In this article, we'll explore the benefits of using flex tape on power steering hoses and provide step-by-step instructions for applying it correctly.
- In conclusion, coupling for plumbing is a specialized art form that demands attention to detail and an understanding of various materials and techniques. By choosing the right type of coupling and ensuring proper installation and maintenance, plumbers can create reliable connections that stand the test of time, preventing leaks and ensuring the efficient operation of plumbing systems.
- **Repairing Jet Wash Hoses
- However, it's important to note that while a 300% power steering hose can significantly enhance the performance, it also requires regular maintenance and timely checks. Any sign of leaks, swelling, or hardening could be an indication of potential issues that need immediate attention. Regular inspections and prompt replacement when necessary can prevent more significant problems and prolong the life of the hose.
- The 4 Inch Waste Coupling A Crucial Component in Industrial Efficiency
- In conclusion, the power steering hose is a critical component of the John Deere 455's power steering system. Regular maintenance and timely replacement of the power steering hose can help ensure smooth and efficient operation of your tractor. By following the steps outlined above, you can easily replace the power steering hose on your John Deere 455 and keep your tractor running smoothly for years to come.
- To fix a power steering hose leak in your Nissan Titan, the damaged hose will need to be replaced. Depending on the extent of the leak, you may also need to have the power steering system flushed and refilled with fresh fluid. It's essential to have this repair done by a qualified mechanic to ensure it's done correctly and safely.
- After selecting the new hose, prepare the area for installation by cleaning the connection points and applying a small amount of clean engine oil to the hose fittings
- Next, the mechanic selects the appropriate crimping die for the specific size and type of hose being worked on. The die is then placed in the crimper, and the hose is inserted into the die with the end that requires crimping facing outward.
- The 25mm hose pipe connector comes in two primary types slip-on connectors and threaded connectors. The slip-on connector, as the name suggests, slides onto the end of the hose or pipe, while the threaded connector requires the use of a nut to secure it in place. Each type has its own set of advantages and is suited to different situations.
By paying attention to these installation guidelines, you can help ensure the air conditioning system in the bus functions efficiently, providing passengers with a comfortable and pleasant ride.
- Repairing a car's AC rubber hose is a relatively straightforward process, but it's important to have the job done by a professional to ensure that it's done correctly. The first step in repairing the hose is to diagnose the source of the problem. This may involve pressurizing the AC system to locate the leak or visually inspecting the hose for damage. Once the issue has been identified, the damaged section of the hose will need to be replaced Once the issue has been identified, the damaged section of the hose will need to be replaced
Once the issue has been identified, the damaged section of the hose will need to be replaced Once the issue has been identified, the damaged section of the hose will need to be replaced
car ac rubber hose repair.
- The power steering hose diagram for a Dodge Ram 1500 typically shows the power steering pump at one end of the hose, connected to the steering gear at the other end. The hose is made of high-quality rubber or metal, designed to withstand the high pressures generated by the power steering system. Over time, however, the hose can become damaged due to wear and tear, heat, or exposure to chemicals and contaminants.
- Moreover, brake line hose kits contribute to overall vehicle safety
- Crafted from premium materials, the Gen 202 power steering hose boasts improved flex life and resistance to heat, ozone, and various fluids. Its construction incorporates advanced polymers and reinforced layers that prevent cracking and leakage, which are common issues in older hose models. This results in reduced maintenance costs and extended service intervals for vehicle owners.
- In conclusion, the power steering hose is an essential part of the 2005 Nissan Altima's steering system, and it's important to replace it promptly if it becomes damaged or worn. By following these simple steps, you can keep your vehicle running smoothly and avoid costly repairs down the line.
- In the realm of plumbing and construction, the role of corrugated pipe couplings is indispensable, particularly the 4 variety. These specialized connectors play a pivotal part in joining pipes, ensuring the seamless flow of liquids or gases while providing structural integrity to the piping system. This 4 corrugated pipe coupling, with its unique design and functionality, has proven to be a game-changer in various industries.
- 2. Drain the power steering fluid from the system. You can do this by removing the reservoir cap and allowing the fluid to drain out.
- A pressure washer sewer jetter is a powerful tool used for cleaning out sewer lines and drains. It combines the high-pressure water stream of a pressure washer with a specialized nozzle designed to clean out debris and blockages from pipes. This tool is a must-have for anyone who deals with clogged drains or sewer lines on a regular basis.
- On average, a well-maintained power steering hose can last anywhere between 50,000 to 100,000 miles or about 7 to 14 years, depending on various factors. This lifespan can vary significantly based on driving conditions, usage patterns, quality of the hose, and regular maintenance practices.
- Brake hose replacement is an essential aspect of automotive maintenance that often goes overlooked until a problem arises. The brake system in a vehicle is a complex network of components, and the brake hoses play a pivotal role in ensuring the efficient and safe functioning of this system.
Qirui Te was founded with an investment of 78 million yuan, with a factory area of more than 16,000 square meters and more than 100 employees, is a well-known auto parts manufacturer mainly producing automotive air conditioning hoses.
- Rubber is the preferred material for power steering hoses because of its durability and flexibility. Rubber hoses can withstand high pressures and temperatures, making them ideal for handling the hydraulic fluid used in power steering systems. Additionally, rubber hoses can bend and flex without cracking or breaking, ensuring reliable performance over time.
- Another advantage of using a pressure washer sewer drain cleaning hose is its efficiency
- In the world of pipe fittings and plumbing systems, the 40mm solvent weld straight connector stands as an essential component, offering robust and reliable connections. This article delves into the intricacies of this tool, its purpose, usage, and the benefits it brings to various applications.
- Fortunately, repairing air conditioning pipes is a relatively straightforward process that can be performed by a qualified mechanic. The first step is to diagnose the problem by checking the pressure and temperature readings of the system. This will help identify any leaks or blockages in the pipes This will help identify any leaks or blockages in the pipes
This will help identify any leaks or blockages in the pipes This will help identify any leaks or blockages in the pipes
car air con pipe repair. Once the source of the problem is identified, the damaged section of the pipe can be replaced or repaired using specialized tools and materials.
- 2. Remove the old power steering hose First, you will need to drain the power steering fluid from the system. You can do this by removing the cap from the power steering reservoir and using a turkey baster or suction tool to remove the fluid. Once the fluid is drained, you can loosen the clamps or fittings that hold the power steering hose in place and remove the hose from the vehicle.
- Using a stop leak for power steering hoses is typically a straightforward process
stop leak for power steering hose. Most products come in a liquid form and can be easily added to the power steering fluid reservoir. The stop leak will then circulate through the system and find and seal any leaks in the power steering hoses. - A 3 inlet hose connector is a crucial component in many plumbing systems. This connector is designed to connect a 3 inlet hose to a water source, allowing for efficient water flow and distribution. Whether you are a homeowner looking to upgrade your plumbing system or a professional plumber in need of high-quality connectors, a 3 inlet hose connector is a reliable and durable option.
- When choosing a sewer jetter pressure washer, it is important to consider the size and power of the equipment needed for the job. Smaller residential models are available for occasional use, while larger commercial units are designed for heavy-duty cleaning tasks. It is also essential to follow safety guidelines and wear proper protective gear when operating a sewer jetter, as the high-pressure water can cause injury if not used correctly.
- 4
- One of the key benefits of using Earl's Power Steering Hose Kit is its universal fit design. This means that the kit can be used on a wide range of vehicles, regardless of their make, model, or year. Whether you drive a car, truck, SUV, or van, Earl's Power Steering Hose Kit has got you covered.
- 8. **Bleed the System** Start the engine and let it idle for a few minutes. Turn the steering wheel gently back and forth until the fluid runs clear. This will remove any air bubbles from the system.
- 2. Difficulty steering The steering wheel may feel heavier or more rigid, especially when turning at low speeds.
- Moreover, the quality of the 22mm nail clipper often reflects in its performance
- Upgrading to a new e46 power steering hose kit brings several advantages
- If you suspect that your Acura MDX's power steering hose is in need of replacement, there are a few signs to look out for. One common indicator is a loss of power steering fluid, which may be visible as puddles underneath the vehicle or as low fluid levels in the power steering reservoir. You may also notice difficulty steering, especially at lower speeds or when turning the wheel. In some cases, you may hear a whining or groaning noise when turning the steering wheel, which can also be a sign of power steering hose issues.