Once you have selected the most suitable seal available, considering the environment, temperature, shaft speed, pressure, lubrication availability, as well as the size, of course, the seal should be stored adequately and then fitted properly. Here are a few suggestions that could help:-

In addition to the installation procedure, our specialists and suppliers would also like to draw your attention to some cases that occur around oil seals.

If these criteria are met, damage of the machine can be reduced, the time needed to replace the oil seals when performing repairs can be shortened, and the machine can be used for a longer period of time.

First disconnect the battery earth terminal , to avoid the risk of a short circuit while the fuel pipes are disconnected.

Metal O.D. wall type (with a reinforcing inner metal case) Protects the main lip.

Fundamental things and its importance 

Oil seals are protective elements. They prevent the mixing of water and lubricants within a machine, thereby ensuring optimal machine functionality. Also, oil seals help to prevent lubricant leakage at high pressure like when the machine is working at an extremely high rate. Not only that, radial shaft seals stop foreign components from entering a machine. This is because they can contaminate the lubricant and even damage the machine.

-

If these specific tools aren’t available, it’s entirely possible to correctly seat an oil seal in its housing using a hammer. Ideally, this hammer will be plastic or rubber due to it’s more forgiving nature. Using this and a strike plate that covers the entire seal will lend you accuracy while driving it in. The downside to this method is the inability to drive the seal any further than the strike plate will allow.

Oil seals, also known as rotary shaft seals or lip seals, are a specific type of gasket designed to prevent the leakage of oil or other fluids in rotating shafts. 

Oil seals are protective elements. They prevent the mixing of water and lubricants within a machine, thereby ensuring optimal machine functionality. Also, oil seals help to prevent lubricant leakage at high pressure like when the machine is working at an extremely high rate. Not only that, radial shaft seals stop foreign components from entering a machine. This is because they can contaminate the lubricant and even damage the machine.