In the context of titanium dioxide determination, the process generally begins with the sample preparation, where a known mass of the sample containing TiO2 is dissolved or digested appropriately. The subsequent steps involve adding a precipitating agent, such as ammonium sulfate or sulfuric acid, to the prepared solution, which facilitates the formation of a titanium precipitate. This precipitate is often titanium hydroxide, which is not only insoluble but can be easily filtered out from the liquid phase.

Lithopone is an inorganic white pigment, obtained from co-precipitation of Zinc sulfide (ZnS) and Barium sulfate (BaSO4). Titanium Dioxide (TiO2) has replaced Lithopone as a white pigment in majority applications as TiO2 is more durable. However, it is much cheaper than TiO2 and has advantages such as low binder requirement and good dispensability. As a white pigment, it can improve the substrate's weather resistance, and improve the fungicidal properties of paint formulations. Some of the major applications of Lithopone include manufacturing of paint pigments, plastic & rubber products, paper, printing inks, cosmetics, and leather & linoleum products. It is commercially available under names such as pigment white 5, Barium zinc sulfate sulfide, Becton White, C.I. 77115, Charlton White, Enamel White, and Zincolith. On the basis of content of ZnS, Lithopone is available at 28%-30% Lithopone and 60% Lithopone.

Promotion of obesity-related metabolic disorders

BaS+ZnSO4→ZnS·BaSO4

The production of ROS was studied on white blood cells as a model to screen the effect on eukaryotic cells after being exposed to samples and solar simulated irradiation (according to the level of penetration under the skin). For that purpose, the leukocytes were separated from anticoagulated fresh blood using the Ficoll-Hypaque reactive in a well-known technique [33]. Then, 50 μL of suspensions of P25TiO₂NPs (0.2 mg/mL and 0.02 mg/mL), vitaminB2@P25TiO₂NPs (0.2 mg/mL and 0.02 mg/mL) and vitamin B2 (0.2 mg/mL and 0.02 mg/mL) were prepared and mixed with 50 μL of white blood cells suspension. A solution of 3% H₂O₂ was used as positive control and PBS as negative control. Then, the samples were irradiated using the LED panel for 3 and 6 h to simulate the light penetration into the skin. Also, a set of samples was kept in the dark as control. Finally, the ROS were detected through the colorimetric assay employing the nitroblue tetrazolium salt (NBT salt) and the absorbance at 650 nm was measured. The experiment was reproduced twice; the standard deviation was calculated and p-value < 0.05 were considered significant.