titanium dioxide for coatings manufacturer

The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of

...

In its 2016 opinion, the ANS Panel recommended new studies be carried out to fill the gaps on possible effects on the reproductive system, which could enable them to set an Acceptable Daily Intake (ADI ). Uncertainty around the characterisation of the material used as the food additive (E 171) was also highlighted, in particular with respect to particle size and particle size distribution of titanium dioxide used as E 171.   

...