3.  TEMPERATURE: Similar to the pressure level, you need to know what temperature your machinery can operate at. You need to choose a seal that can withstand the heat or cold. PTFE have the widest rang of temperature, making them a safe option when you are uncertain of the range.

The basic principle of an oil seal is fairly straightforward. It is installed adjacent to the bearing, with the flexible lip against the rotating shaft and the casing pressed into the housing to hold the seal in place. It’s important that the sealing lip is lubricated to prevent it from overheating as a result of any generated friction. It’s also crucial to understand which type of seal is appropriate for your particular machinery. Before selecting your seal, consider the environment, temperature, pressure and shaft speed of your machine, as well as the type of medium the seal will come into contact with during operation. These considerations will all determine the size, colour, and type of lip material or sealing element to choose, and whether it can be sealed in or sealed out.

Introduction

5, the oil seal is easy to dismantle and inspection is convenient.

6. Check for Leaks

ERIKS type R (type A according to the DIN standard) is identical in shape to type M, but has a rubber outer case with metal reinforcement on the inside. The rubber creates a good seal in the housing, even if the housing has suffered minor damage or is not in its best condition for other reasons. The RST version has a dust lip. These types are often chosen to replace a type with a metal outer case because they are easier to install and can cope with minor damage to the groove, such as scratches.