properties lithopone

tion of the precipitate, the mass is filter pressed, dried, muflled and processed in the on the market, in that the {covering capacity of the pigment is greatly increased, as well The titanium oxide is peptized or held in as its fastness to light, and ease of working in oils. It is also superior to the so called double strength lithopone made by doubling the zinc sulphide conent, in that it is very neutral to acid vehicles. It is also far superior to other titanium compounds on the market, inasmuch as greater opacities are obtained with a relatively small amount of titanium oxide, than has heretofore been obtained with far greater proportions of titanium oxide, thereby effecting a considerable economy over that of other similar products containing'titanium oxide.

...

To make up the batch of lithopone the solution containing the original 1050 pounds of barium sulphide and 856 pounds of titanium acid cake is added to sufiicient zinc sulphate solution of approximately 35 Baum at 60 Centigrade to completely precipitate all the BaS as zinc sulphide and barium sulphate so that the final precipitate contains a suspen-. sion of co-p'recipitated zinc sulphide barium sulphate intimately mixed with a suspension of titanium oxide. On the completion of the reaction, shown by the complete absence of either soluble zinc or barium in a filtered por-.

...
{随机栏目} 2025-08-14 21:08 2585
  • In the world of manufacturing, the combination of talc and titanium dioxide is a match made in heaven. These two minerals, when used together, can significantly enhance the performance and quality of various products. Talc, known for its softness and lubricating properties, provides excellent slip resistance and reduces friction, making it an ideal additive for plastics, rubber, and coatings. Titanium dioxide, on the other hand, is a powerful pigment that imparts strength, durability, and UV protection to products.

    {随机栏目} 2025-08-14 20:20 1840
  • At present, the domestic wet zinc smelting mainly adopts the roasting-leaching-electrowinning production process, and the zinc content in the acid leaching residue is generally 8-15%, some up to 20%, and the sulfur mass fraction is 6-12%, of which sulfuric acid The root mass fraction is 15-30%, mainly in the form of 0^0 4 (in this ammoniatic environment, the leaching rate of sulfate leaching in multiple stages can reach 70%). The zinc in the acid leaching residue is mainly in the form of ZnFe 2 0 4 . In order to recover these zinc, the treatment methods are currently available in the fire method and the wet method. The fire method is the rotary kiln evaporation method (Wilz method) and the fumigating furnace evaporation method. . The wet method has hot acid leaching or high temperature pressure leaching. The fire treatment process is long, the equipment maintenance is large, the investment is high, the working environment is poor, and a large amount of coal or metallurgical coking coal is consumed, which has low efficiency and large environmental pollution. Therefore, it is usually leached by hot acid or high-pressure leaching. These methods still have the disadvantages of: 1 consumption of a large amount of acid, low leaching rate, due to the large amount of calcium sulfate, calcium sulphate and other ultrafine particles to isolate the zinc oxide particles, resulting in Electrolytic zinc enterprises are difficult to leach in acid environment, and the second weak acid leaching is not meaningful because the recovery rate is too low. 2 If leached with strong acid, although ZnFe 2 0 4 is destroyed, the leaching rate is improved, but the iron leaching rate is also high (up to 60%). The pressure of iron removal is large, and more reagents are consumed. 3 High temperature and high pressure equipment is corroded. Serious, complicated equipment investment; 4 high operating costs, poor economic returns. 5 The last slag discharged is acid leaching residue, which brings new pollution to the environment. It has to be cured and landfilled, which not only pollutes the environment, but also wastes resources.

    {随机栏目} 2025-08-14 19:46 1356
  • As a leading titanium dioxide color manufacturer, we understand the importance of maintaining stringent quality controls and investing in research to stay ahead in an ever-evolving market. Our dedication to customer satisfaction and environmental stewardship has solidified our reputation as a pioneering force in the dye industry. With ongoing innovations and a focus on sustainable practices, we are confident in our ability to continue shaping the future of color manufacturing for generations to come.

    {随机栏目} 2025-08-14 18:42 485