barium sulfate particle size factory

The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of

...

I will now describe some typical methods of practicing my invention, whereby lithopone of any desired grade may be produced. One of the known grades of lithopone as prepared and mixed for the trade contains sev- 6o enteen per cent. of zinc sullid. To produce this grade and a by-product of hydrosulfid of sodium, for example, I proceed as follows: The usual precautions, it will be understood, mustbe taken in preparing or for insuring the purity of the several ingredients used; but these preliminaries do not require description here. Separate aqueous solutions of the following ingredients in the proportions named are prepared: zinc sulfate, one x hundred and sixty-one pounds; barium sulfid, three hundred and thirty-eight pounds, and sodium bisulfate one hundred and twenty pounds. These ingredients, it will be recognized, are readily soluble in water. The separate solutions are then mixed and the following chemical reaction at once takes place:

...