r960 tio2 supplier

To make up the batch of lithopone the solution containing the original 1050 pounds of barium sulphide and 856 pounds of titanium acid cake is added to sufiicient zinc sulphate solution of approximately 35 Baum at 60 Centigrade to completely precipitate all the BaS as zinc sulphide and barium sulphate so that the final precipitate contains a suspen-. sion of co-p'recipitated zinc sulphide barium sulphate intimately mixed with a suspension of titanium oxide. On the completion of the reaction, shown by the complete absence of either soluble zinc or barium in a filtered por-.

...

The conventional surface treatment methods of titanium alloy include glow discharge plasma deposition, oxygen ion implantation, hydrogen peroxide treatment, thermal oxidation, sol-gel method, anodic oxidation, microarc oxidation, laser alloying, and pulsed laser deposition. These methods have different characteristics and are applied in different fields. Glow discharge plasma deposition can get a clean surface, and the thickness of the oxide film obtained is 2 nm to 150 nm [28]. The oxide film obtained from oxygen ion implantation is thicker, about several microns [914]. Hydrogen peroxide treatment of titanium alloy surface is a process of chemical dissolution and oxidation [1516]. The dense part of the oxide film is less than 5 nm [1721]. The oxide film generated from the thermal oxidation method has a porous structure, and its thickness is commonly about 10-20 μm [2225]. The oxide film from the sol-gel method is rich in Ti-OH, a composition that could induce apatite nucleation and improve the combining of implants and bone. It has a thickness of less than 10 μm [2628]. Applied with the anodic oxidation method, the surface can generate a porous oxide film of 10 μm to 20 μm thickness [2931]. Similarly, the oxide film generated from the microarc oxidation method is also porous and has a thickness of 10 μm to 20 μm [3233].

...