Natural barite and anthracite containing more than 95% barium sulfate are mixed and fed at a ratio of 3:1 (mass). After being crushed to a diameter of less than 2cm, it enters the reduction furnace. The furnace temperature is controlled to be 1000-1200°C in the front section and 500-500 in the back section. 600°C, the reduction furnace rotates at a speed of 80 seconds per revolution, and the reaction conversion rate is 80% to 90%.

Lithopone is an inorganic white pigment, obtained from co-precipitation of Zinc sulfide (ZnS) and Barium sulfate (BaSO4). As a white pigment, it acts as a cost-effective alternative for TiO2. Some of the properties of Lithopone include high brightness and performance under UV exposure. Lithopone requires less wetting agent to achieve optimum wetting of its surface. It is commercially graded on the basis of amount of ZnS. Its grades include 28%, 30%, and 60% ZnS. As a comparatively inexpensive white pigment, Lithopone is presently used in various paint formulations, road marking paints, jointing compounds, and putties.

One of the key advantages of using anatase titanium dioxide in coatings is its superior UV resistance. This makes it ideal for outdoor applications where coatings are exposed to sunlight and other environmental factors that can degrade the finish over time. Anatase titanium dioxide helps to protect the underlying surface from UV rays, preventing fading and deterioration.

 (1) Konaka et al. 1999. (2) Serpone et al. 2006. (3) Brezova et al. 2004. (4) Dunford et al. 1997. (5) Warner et al. 1997. (6) Salinaro et al. 1997. (7) Maness et al. 1999.