Material Code ISO 1629

The basic principle of sealing is straightforward – the flexible lip is held against the rotating part (usually the shaft) whilst the casing (or O.D.) is pressed into the housing or bore and holds the seal in place. The sealing lip needs some form of lubrication to avoid overheating and is usually energized by means of a garter spring.

Proper installation of the 25x47x7 oil seal is essential to ensure its effectiveness. It is important to carefully clean and prepare the surfaces where the seal will be placed, as any dirt or debris can compromise the seal's ability to function properly. Additionally, the seal should be installed with the correct orientation and pressure to create a tight and secure seal.

Oil seals, which are also referred to as radial shaft seals, rotary shaft seals, grease seals, or fluid seals, are used to close the gaps between fixed and moving parts of mechanical equipment. They are put between moving and stationary mechanical parts to make sure that moisture, contaminants, corrosive materials, and abrasives don’t cause any damage to these parts.

Figure 2.11. Rubber enclosed metal seal

Oil seals are often called grease, fluid, or dirt seals. These seals close spaces between stationary and moving components in mechanical equipment. Oil seals are designed to prevent the escape of lubricant. They also block contaminants from entering machinery. This is especially important in severe environments where heat and foreign objects may be frequently present. They also prevent the mixing of different mediums like lubricating oil and water.

■Anti-wear agents: Anti-wear agents help protect parts of the engine that are especially susceptible to damage from high temperatures, like cylinder walls, lifters, cams, and piston rings. This additive acts as a protective layer around these components to limit friction in metal-on-metal situations.

(2) When the ambient temperature is high, polyacrylate or silicon, fluorine, and silicon fluorine rubber should be selected. And should try to lower the oil temperature in the tank. When the operating temperature is too low, cold-resistant rubber should be used.

Another factor that can affect the cost of new spark plugs is the brand. Some well-known brands in the automotive industry may charge a premium for their spark plugs due to their reputation for quality and reliability. However, there are also more affordable brands that offer reliable performance at a lower cost.