china zinc barium sulphate

The natural barite containing more than 95% of barium sulfate is mixed with anthracite in a ratio of 3:1 (mass), and is pulverized to a diameter of about 2 cm or less to enter a reduction furnace, and the front stage of the furnace temperature is controlled by 1000 to 1200 ° C, and the latter stage is 500 to 600 ° C, the reduction furnace rotates at a speed of 80s per revolution, the reaction conversion rate is 80% to 90%, the obtained barium sulfide enters the leaching device, the control temperature is above 65 ° C, and the content of barium sulfide is 701%, and then enters the clarification. The barrel is clarified and then added with zinc sulfate to control the zinc sulfate content to be greater than 28%, and the pH is 8-9, and a mixture of barium sulfate and zinc sulfide having a density of

...

The company has a wide variety of products, mainly including rutile titanium dioxide R818, R838, R868, R878, covering profiles, also have anatase TiO2 A1. Soft plastics and masterbatches, flat coatings, high-gloss coatings, water-based coatings, oil-based coatings, rubber, powder coatings, papermaking and other special fields, its products have been known in the market for their excellent whiteness and brightness, good hiding power and tinting power, stable application performance, and stable product quality and supply capacity.

...

Thusfive hundred and sixty-three pounds of a seventeen-per-ccnt. grade of lithopone will be precipitated, from which the soda liquor may be filtered and then washed out. Fifty six pounds of sodium hydrosulfid may then be recovered from the solution, if no further treatment thereof is contemplated, by any suitable evaporating process. By employing sodium sulfate and suitably altering the reaction I have also produced lithopone and sogo dium sulfid. The products of these reactions will be found to be of unusual purity and require no subsequent treatment for placing them upon the market.

...