carmine titanium dioxide factory

Thusfive hundred and sixty-three pounds of a seventeen-per-ccnt. grade of lithopone will be precipitated, from which the soda liquor may be filtered and then washed out. Fifty six pounds of sodium hydrosulfid may then be recovered from the solution, if no further treatment thereof is contemplated, by any suitable evaporating process. By employing sodium sulfate and suitably altering the reaction I have also produced lithopone and sogo dium sulfid. The products of these reactions will be found to be of unusual purity and require no subsequent treatment for placing them upon the market.

...

sufiicient sulphuric acid to extract up to 95 per cent or more, of the titanium oxide prescut. This extraction is carried on so that the resulting product, after the addition of the required amount of sulphuric acid, is in the form of a dry powdered .mass, in which approximately 95 per cent of the titanium is in a soluble form. Th dry powdered mass is thenextractedin suitable leaching tanks with water, whereby a solution of approximately 70 grams of sulphuric acid and 100 grams of titanium oxide to the liter, is obtained.

...
  • ≤0.6

  • Moreover, titanium dioxide is also used in rubber formulations to improve the processing and curing properties of rubber compounds. It acts as a catalyst in the vulcanization process, speeding up the cross-linking of rubber molecules and enhancing the overall performance of the final product. This results in rubber products that are stronger, more flexible, and better suited for a wide range of applications.


  • Scrap zinc or concentrated zinc ores are dissolved in sulfuric acid, the solution is purified and the two solutions are reacted. A heavy mixed precipitate results that is 28 to 30% zinc sulfide and 72 to 70% barium sulfate.