Overall, the Food Directorate's comprehensive review of the available science of TiO2 as a food additive showed:
Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [21–24]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.
Lithopone is an inorganic white pigment, obtained from co-precipitation of Zinc sulfide (ZnS) and Barium sulfate (BaSO4). Titanium Dioxide (TiO2) has replaced Lithopone as a white pigment in majority applications as TiO2 is more durable. However, it is much cheaper than TiO2 and has advantages such as low binder requirement and good dispensability. As a white pigment, it can improve the substrate's weather resistance, and improve the fungicidal properties of paint formulations. Some of the major applications of Lithopone include manufacturing of paint pigments, plastic & rubber products, paper, printing inks, cosmetics, and leather & linoleum products. It is commercially available under names such as pigment white 5, Barium zinc sulfate sulfide, Becton White, C.I. 77115, Charlton White, Enamel White, and Zincolith. On the basis of content of ZnS, Lithopone is available at 28%-30% Lithopone and 60% Lithopone.