lithopone powder quotes supplier
...
2025-08-16 09:59
2654
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.
Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.
Storage safety properties
PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.
Solubility
PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;
PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.
Viscosity characteristics of PVB solution
The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;
Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.
Dissolution method of PVB
Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,
At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.
The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.
Processing properties
Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.
The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.
Compatibility
PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and MELAMINE resin.
B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.
...
2025-08-16 09:47
783
Titanium dioxide, or TiO2, sometimes referred to as E171, is an inorganic, solid substance used in a wide range of consumer goods including cosmetics, paint, plastic and food, according to the American Chemistry Council.
...
2025-08-16 09:45
2631
...
2025-08-16 09:13
621
Company X also offers competitive pricing, making their titanium dioxide R-996 a cost-effective option for many businesses. They have a strong track record of delivering products on time, ensuring that customers receive their orders when they need them They have a strong track record of delivering products on time, ensuring that customers receive their orders when they need them
They have a strong track record of delivering products on time, ensuring that customers receive their orders when they need them They have a strong track record of delivering products on time, ensuring that customers receive their orders when they need themtitanium dioxide r-996 manufacturers.
...
2025-08-16 08:53
1785
Inventory: Low inventory of mainstream producers, it is expected that the overall size of spot inventory today is low, and there is less stock in mainstream factories.2. Mentality: the buyer has to prepare goods in advance, and the new order price is slightly less willing to purchase in bulk; Because the seller's inventory is small, the manufacturer has no willingness to reduce the price of sales, and the demand for new orders in the market is relatively large.Trend: The load of titanium dioxide enterprises is stable, the willingness to ship at low prices is not strong, and the downstream buyers still have inventory digestion, and the intention to supplement orders in the short term is limited. It is expected that the market price of titanium dioxide is stable today, and the market trading atmosphere is more general.
According to the feedback of manufacturers, the new orders of mainstream factories maintain stable prices, and the overall new volume of the market is limited. On the demand side, the terminal basically had batch replenishment last month, and the purchase intention of new orders was low; On the supply side, mainstream manufacturers normally produce and deliver goods, and the actual output of the industry is stable. Most factories quote a new price of 17,000 yuan/ton or more market negotiation range reference 16000-17200 yuan/ton, plastics and papermaking related downstream feedback part of the tight model price is higher. Recent titanium dioxide raw materials are expected to weaken, titanium dioxide price support is relatively limited, comprehensive market factors, the current titanium dioxide market many buyers hold a wait-and-see mentality.
According to the feedback of manufacturers, the new orders of mainstream factories maintain stable prices, and the overall new volume of the market is limited. On the demand side, the terminal basically had batch replenishment last month, and the purchase intention of new orders was low; On the supply side, mainstream manufacturers normally produce and deliver goods, and the actual output of the industry is stable. Most factories quote a new price of 17,000 yuan/ton or more market negotiation range reference 16000-17200 yuan/ton, plastics and papermaking related downstream feedback part of the tight model price is higher. Recent titanium dioxide raw materials are expected to weaken, titanium dioxide price support is relatively limited, comprehensive market factors, the current titanium dioxide market many buyers hold a wait-and-see mentality.
...
2025-08-16 08:29
1844
Ponceau 4R and Titanium Dioxide A Perfect Match for Food Colorants
...
2025-08-16 08:18
808
...
2025-08-16 08:14
349
...
2025-08-16 08:00
552
Another important application of titanium dioxide is in the production of self-cleaning surfaces
...
2025-08-16 07:24
1603
