In applications where the grating may need more support than that offered by the molded in recesses at the top of the flume, Openchannelfow installes tube supports at the inlet / outlet of the flume for the grating to sit on to provide additional support.

In recent decades, carbon aerogels have been widely explored by using graphitic carbons and soft carbons, which show advantages in superelasticity. These elastic aerogels usually have delicate microstructures with good fatigue resistance but ultralow strength. Hard carbons show great advantages in mechanical strength and structural stability due to the sp3 C-induced turbostratic “house-of-cards” structure. However, the stiffness and fragility clearly get in the way of achieving superelasticity with hard carbons. Up to now, it is still a challenge to fabricate superelastic hard carbon-based aerogels.

In addition to standard sizes, we also offer custom-sized gratings. In Indonesia, grating products have the most extensive variations in mesh sizes including 38×38, 50×50, rectangular mesh 100×25, rectangular mesh 152×38, mini mesh 20×20, micro mesh 13×13, and with variable heights ranging from H25, H30, H38, to 50. Available surface finishes include concave, anti-skid, chequer plate, and flat.