94% tio2 rutile grade titanium dioxide supplier

The raw material used in this method is FeSO4. In order to maintain the Fe3 + concentration in the reaction medium in a specific range, reducing agent iron sheet is added in the reaction process. Iron yellow crystal seed was added and air was introduced to synthesize iron yellow under certain pH conditions. The method mainly includes two steps: (1) firstly, FeSO4 · 7H2O is used as raw material, NaOH or NH3 · H2O is used as precipitant or pH regulator, and air is used as oxidant to prepare crystal seed; (2) Iron yellow is produced by two-step oxidation with crystal seed, FeSO4, iron sheet and air.

...

In addition to product consistency, pricing is another important factor to consider when selecting a titanium dioxide supplier. While it is essential to find a supplier that offers competitive pricing, it is equally important to ensure that the quality of the product is not compromised
13463-67-7
13463-67-7 titanium dioxide suppliers. By comparing prices from different suppliers, customers can find the best value for their money without sacrificing product quality.

...

The titanium dioxide market fluctuated in the first two quarters of 2023. These pricing patterns resulted from poor demand and reduced intakes from the downstream industries. Amid the slow demand, the manufacturers were forced to reduce their outputs. With rising inflation rates, production cuts gradually increased. Given the economic downturn, the labor strikes further affected the market dynamics, thereby exerting pressure on the pricing fundamentals.

...



Pure PVB is non-toxic and harmless to human body. In addition, ethyl acetate or alcohol can be used as solvent, so PVB is widely used in printing ink of food containers and plastic packaging in European and American countries.

Storage safety properties

PVB can be stored for two years without affecting its quality as long as it is not in direct contact with water; PVB shall be stored in a dry and cool place and avoid direct sunlight. Heavy pressure shall be avoided during PVB storage.

Solubility

PVB is soluble in alcohol, ketone, ester and other solvents. The solubility of various solvents changes according to the functional group composition of PVB itself. Generally speaking, alcohol solvents are soluble, but methanol is more insoluble for those with high acetal groups; The higher the acetal group, the easier it is to dissolve in ketone solvents and ester solvents;

PVB is easily soluble in cellosolve solvents; PVB is only partially dissolved in aromatic solvents such as xylene and toluene; PVB is insoluble in hydrocarbon solvents.

Viscosity characteristics of PVB solution

The viscosity of PVB solution is greatly affected by the formula of solvent and the type of solvent; Generally speaking, if alcohol is used as solvent, the higher the molecular weight of alcohol, the higher the viscosity of PVB solution;

Aromatic solvents such as xylene and toluene and hydrocarbon solvents can be used as diluents to reduce the viscosity of PVB solution; The effect of PVB chemical composition on viscosity is summarized as follows: under the same solvent and the same content of each base, the higher the degree of polymerization, the higher the solution viscosity; Under the same solvent and the same degree of polymerization, the higher the acetal group or acetate group, the lower the solution viscosity.

Dissolution method of PVB

Where mixed solvents are used, the dissolution step is to first put aromatic solvents (such as xylene, toluene, etc.) or ester solvents (such as n-butyl acetate, ethyl acetate, etc.) into the mixing, slowly put PVB into the mixing, and then add alcohol solvents (such as n-butanol, ethanol, etc.) after PVB is dispersed and expanded,

At this time, the dissolution time can be shortened by heating; Using this dissolution method, the formation of lumpy PVB can be avoided (because the dissolution time will be several times after the formation of lumpy PVB), so the dissolution speed can be accelerated. Generally, the ratio of aromatic and alcohol solvents is 60 / 40 ~ 40 / 60 (weight ratio), and PVB solution with low viscosity can be prepared.

The solvent composition contains 2 ~ 3wt% water, which can improve the hydrogen bonding strength of alcohol solvents and help the solubility of PVB.

Processing properties

Although PVB resin is a thermoplastic, it has little processability before plasticizer is added. Once plasticizer is added, its processability is very easy.

The purpose of general coatings and adhesives is to change the resin characteristics by adding plasticizers to meet the application requirements, such as film softness, reducing the TG point of the resin, reducing the heat sealing temperature, maintaining low-temperature softness, etc.

Compatibility

PVB can be compatible with a variety of resins, such as phenolic resin, epoxy resin, alkyd resin and 
MELAMINE resin.

B-08sy, b-06sy and b-05sy with high acetal degree can be mixed with nitrocellulose in any proportion. PVB and alkyd resin are partially compatible. General PVB is compatible with low molecular weight epoxy resin, while high molecular weight epoxy resin needs PVB with high acetal degree to be compatible with each other.

...
{随机栏目} 2025-08-14 12:29 1506
  • One of the main applications of titanium dioxide in paper is in the production of high-quality coated papers. Titanium dioxide is often added to the coating formulations to enhance the whiteness and brightness of the paper surface. This helps to improve the print quality of the paper, as it provides a smooth and even surface for ink to adhere to. The high opacity of titanium dioxide also helps to prevent show-through, making the printed text or images more vibrant and legible.

    {随机栏目} 2025-08-14 11:56 2356