Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [21–24]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.
Rebecca Capua is an assistant conservator in the Paper Conservation Department at the Metropolitan Museum of Art since 2009. She received an MA in art history and an Advanced Certificate in art conservation from the Conservation Center, Institute of Fine Arts, New York University in 2007. Her primary area of research is on the materials of American artists of the late 19th and early 20th century. Address: The Sherman Fairchild Center for the Conservation of Works on Paper, Metropolitan Museum of Art, 1000 Fifth Avenue, New York, NY 10028. Email: rebecca.capua@metmuseum.org.
In terms of refractive index and opacity, lithopone surpasses zinc oxide and lead oxide. Lithopone's high refractive index allows it to efficiently scatter and reflect light, thereby increasing the opacity of various media. Whether you need to enhance the opacity of paints, inks or plastics, lithopones deliver outstanding results, ensuring your final product is completely opaque.
To overcome this challenge, manufacturers use advanced technology and processes to monitor and control the buff percentage of their products. This may involve the use of sophisticated equipment to measure the coating thickness of titanium dioxide particles, as well as automated systems to adjust the level of coating as needed. By carefully controlling the buff percentage, manufacturers can ensure that their products meet the specifications of their customers and maintain a high level of quality and performance.