Modern engine oils, such as the current SG classification for gasoline engines, contain a large fraction of additives, many of which are detrimental to fluoroelastomers. The primary functions of oil-additive packages are to protect metal parts, avoid deposits in the engine, minimize oil degradation, and adjust fluid viscosity. Little attention has been paid to avoiding damage to rubber seals. Instead, elastomer producers have been expected to provide new, higher-performing products at no increased cost to auto manufacturers. Among the additives with moieties that may attack fluoroelastomers at high temperature are detergents (phenolates), dispersants (succinimides, alkylphenol amines), and antioxidants (amines, sulfides, hindered phenols).⁴ Many of these components are multifunctional, containing phenol or amine groups that can dehydrofluorinate and crosslink VDF-containing fluoroelastomers, leading to loss of elongation and eventual embrittlement. However, the rate and extent of reactions with seals are affected by many factors, including whether air is present in the system. When oil is exposed to air at high temperature, additives may undergo considerable changes. For example, a significant fraction of amines may be oxidized to amides, which have little effect on fluoroelastomers.⁵

Advantages:
– Very good fitting stability avoiding pop-out of the seal
– Modern lip design provides low radial forces
– Superior radial stiffness, especially for very large diameters
– Cost effective for expensive elastomer materials
– Suitable for use in combination with axial seal

When choosing seal materials, it is critical to evaluate the environment and application. Common seal materials include: