...
2025-08-14 17:07
240
wholesale dioxide titanium cas 13463-67-7
One of the key factors affecting TiO2 manufacturing is the choice of raw materials. Rutile and anatase are the two most common forms of TiO2, each with its own unique properties and applications. Rutile is known for its higher refractive index and hardness, making it suitable for use in coatings, plastics, and other high-performance applications. Anatase, on the other hand, has better photocatalytic activity and is often used in environmental protection and solar energy applications.
...
2025-08-14 17:06
1965
...
2025-08-14 17:05
2024
Though the Food and Drug Administration (FDA) categorizes titanium dioxide as Generally Recognized as Safe (8), other organizations have issued warnings.
...
2025-08-14 16:54
1832
Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [21–24]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.
...
2025-08-14 16:53
686
...
2025-08-14 16:31
2958
When choosing a P25 TiO2 supplier, it is crucial to consider factors such as particle size distribution, purity, and specific surface area. These factors can significantly impact the performance and quality of the final product. Therefore, it is essential to work with a reputable supplier who can provide high-quality P25 TiO2 that meets your specific requirements.
...
2025-08-14 16:28
1724
3. Regulatory Compliance It is crucial for suppliers to adhere to industry regulations, especially in sectors like food, pharmaceuticals, and cosmetics. Reliable suppliers will ensure their products meet relevant regulatory standards, providing proper documentation and certifications.
...
2025-08-14 16:09
992
Polyvinyl butyral (PVB) is dissolved into 12 ~ 14% solution with ethanol and made into film. It is used for printing paper film of ceramic (or enamel) products. The fired ceramic (or enamel) patterns have bright color and smooth texture. The flower paper is characterized by convenient use, low cost, smaller than the original glue, greatly reducing the decal process and high color burning rate. At present, most porcelain factories in China have formed relatively formal production lines for standardized production. Therefore, the demand for PVB in the ceramic (or enamel) flower paper industry is increasing.
Application field of polyvinyl butyral -- electronic adhesive
Polyvinyl butyral contains hydroxyl, vinyl acetate and butyraldehyde, which has high bonding properties. Phenolic Resin was added into PVB ethanol solution to make adhesive, which can be used for a long time at 120 ℃. The product has strong adhesion to metal, wood, leather, glass, fiber and ceramics; FRP can be manufactured to replace non-ferrous metals such as steel, aluminum and copper; The adhesive made by adding this product and curing agent into epoxy resin is often used for bonding and assembly of electronic instrument components, bonding between metal and porous materials, emergency repair, etc. it can also be used in the field of electronic ceramics. In the development of ceramic integrated electronic circuits, this product with medium viscosity and low hydroxyl is used as ceramic powder adhesive to increase the primary strength of ceramics.
Application field of polyvinyl butyral -- copper foil adhesive
Polyvinyl butyral (PVB) and phenolic resin cooperate to produce copper foil adhesive, which is used in the production of copper clad laminate. It has good peel strength and tin welding temperature resistance, and is widely used in various fields.
Application field of polyvinyl butyral - self adhesive enamelled wire paint
Polyvinyl butyral is the main raw material of self-adhesive enamelled wire paint. After the enameled wire is wound and formed in the electrodes of motors, electrical appliances and instruments, as long as it is heated for several minutes at a certain temperature or treated with appropriate solvent, the coils can be bonded together by themselves without impregnation and drying.
...
2025-08-14 15:34
2029
Titanium dioxide (TiO2) is considered as an inert and safe material and has been used in many applications for decades. However, with the development of nanotechnologies TiO2 nanoparticles, with numerous novel and useful properties, are increasingly manufactured and used. Therefore increased human and environmental exposure can be expected, which has put TiO2 nanoparticles under toxicological scrutiny. Mechanistic toxicological studies show that TiO2 nanoparticles predominantly cause adverse effects via induction of oxidative stress resulting in cell damage, genotoxicity, inflammation, immune response etc. The extent and type of damage strongly depends on physical and chemical characteristics of TiO2 nanoparticles, which govern their bioavailability and reactivity. Based on the experimental evidence from animal inhalation studies TiO2 nanoparticles are classified as “possible carcinogenic to humans” by the International Agency for Research on Cancer and as occupational carcinogen by the National Institute for Occupational Safety and Health. The studies on dermal exposure to TiO2 nanoparticles, which is in humans substantial through the use of sunscreens, generally indicate negligible transdermal penetration; however data are needed on long-term exposure and potential adverse effects of photo-oxidation products. Although TiO2 is permitted as an additive (E171) in food and pharmaceutical products we do not have reliable data on its absorption, distribution, excretion and toxicity on oral exposure. TiO2 may also enter environment, and while it exerts low acute toxicity to aquatic organisms, upon long-term exposure it induces a range of sub-lethal effects.
...
2025-08-14 14:42
1999
...
2025-08-14 17:05
2024
Though the Food and Drug Administration (FDA) categorizes titanium dioxide as Generally Recognized as Safe (8), other organizations have issued warnings.
...
2025-08-14 16:54
1832
Unfortunately, we studied that all of the above methods are employed after machining or forming, and they require a long process chain and costly production types of equipment [21–24]. Therefore, we proposed a titanium alloy implant preparation process that integrated with cutting and surface modification. The oxygen-rich atmosphere increases the partial pressure of oxygen in the oxidizing environment, and the heat generated during the cutting process increases the temperature and the rate of the oxidation. It uses the cutting heat and oxygen-rich atmosphere generated during the cutting process to form the oxide film (TiO2) to improve the corrosion resistance of the titanium alloy. The experimental equipment is shown in Figure 2. Since the cutting temperature is the most important factor in the oxide film formation process, this paper carried out researches based on theoretical analysis and experimental investigation to acquire an ideal temperature range for the cutting process to achieve the oxide layer.
...
2025-08-14 16:53
686
...
2025-08-14 16:31
2958
When choosing a P25 TiO2 supplier, it is crucial to consider factors such as particle size distribution, purity, and specific surface area. These factors can significantly impact the performance and quality of the final product. Therefore, it is essential to work with a reputable supplier who can provide high-quality P25 TiO2 that meets your specific requirements.
...
2025-08-14 16:28
1724
3. Regulatory Compliance It is crucial for suppliers to adhere to industry regulations, especially in sectors like food, pharmaceuticals, and cosmetics. Reliable suppliers will ensure their products meet relevant regulatory standards, providing proper documentation and certifications.
...
2025-08-14 16:09
992
Polyvinyl butyral (PVB) is dissolved into 12 ~ 14% solution with ethanol and made into film. It is used for printing paper film of ceramic (or enamel) products. The fired ceramic (or enamel) patterns have bright color and smooth texture. The flower paper is characterized by convenient use, low cost, smaller than the original glue, greatly reducing the decal process and high color burning rate. At present, most porcelain factories in China have formed relatively formal production lines for standardized production. Therefore, the demand for PVB in the ceramic (or enamel) flower paper industry is increasing.
Application field of polyvinyl butyral -- electronic adhesive
Polyvinyl butyral contains hydroxyl, vinyl acetate and butyraldehyde, which has high bonding properties. Phenolic Resin was added into PVB ethanol solution to make adhesive, which can be used for a long time at 120 ℃. The product has strong adhesion to metal, wood, leather, glass, fiber and ceramics; FRP can be manufactured to replace non-ferrous metals such as steel, aluminum and copper; The adhesive made by adding this product and curing agent into epoxy resin is often used for bonding and assembly of electronic instrument components, bonding between metal and porous materials, emergency repair, etc. it can also be used in the field of electronic ceramics. In the development of ceramic integrated electronic circuits, this product with medium viscosity and low hydroxyl is used as ceramic powder adhesive to increase the primary strength of ceramics.
Application field of polyvinyl butyral -- copper foil adhesive
Polyvinyl butyral (PVB) and phenolic resin cooperate to produce copper foil adhesive, which is used in the production of copper clad laminate. It has good peel strength and tin welding temperature resistance, and is widely used in various fields.
Application field of polyvinyl butyral - self adhesive enamelled wire paint
Polyvinyl butyral is the main raw material of self-adhesive enamelled wire paint. After the enameled wire is wound and formed in the electrodes of motors, electrical appliances and instruments, as long as it is heated for several minutes at a certain temperature or treated with appropriate solvent, the coils can be bonded together by themselves without impregnation and drying.
Polyvinyl butyral (PVB) is dissolved into 12 ~ 14% solution with ethanol and made into film. It is used for printing paper film of ceramic (or enamel) products. The fired ceramic (or enamel) patterns have bright color and smooth texture. The flower paper is characterized by convenient use, low cost, smaller than the original glue, greatly reducing the decal process and high color burning rate. At present, most porcelain factories in China have formed relatively formal production lines for standardized production. Therefore, the demand for PVB in the ceramic (or enamel) flower paper industry is increasing.
Application field of polyvinyl butyral -- electronic adhesive
Polyvinyl butyral contains hydroxyl, vinyl acetate and butyraldehyde, which has high bonding properties. Phenolic Resin was added into PVB ethanol solution to make adhesive, which can be used for a long time at 120 ℃. The product has strong adhesion to metal, wood, leather, glass, fiber and ceramics; FRP can be manufactured to replace non-ferrous metals such as steel, aluminum and copper; The adhesive made by adding this product and curing agent into epoxy resin is often used for bonding and assembly of electronic instrument components, bonding between metal and porous materials, emergency repair, etc. it can also be used in the field of electronic ceramics. In the development of ceramic integrated electronic circuits, this product with medium viscosity and low hydroxyl is used as ceramic powder adhesive to increase the primary strength of ceramics.
Application field of polyvinyl butyral -- copper foil adhesive
Polyvinyl butyral (PVB) and phenolic resin cooperate to produce copper foil adhesive, which is used in the production of copper clad laminate. It has good peel strength and tin welding temperature resistance, and is widely used in various fields.
Application field of polyvinyl butyral - self adhesive enamelled wire paint
Polyvinyl butyral is the main raw material of self-adhesive enamelled wire paint. After the enameled wire is wound and formed in the electrodes of motors, electrical appliances and instruments, as long as it is heated for several minutes at a certain temperature or treated with appropriate solvent, the coils can be bonded together by themselves without impregnation and drying.
...
2025-08-14 15:34
2029
Titanium dioxide (TiO2) is considered as an inert and safe material and has been used in many applications for decades. However, with the development of nanotechnologies TiO2 nanoparticles, with numerous novel and useful properties, are increasingly manufactured and used. Therefore increased human and environmental exposure can be expected, which has put TiO2 nanoparticles under toxicological scrutiny. Mechanistic toxicological studies show that TiO2 nanoparticles predominantly cause adverse effects via induction of oxidative stress resulting in cell damage, genotoxicity, inflammation, immune response etc. The extent and type of damage strongly depends on physical and chemical characteristics of TiO2 nanoparticles, which govern their bioavailability and reactivity. Based on the experimental evidence from animal inhalation studies TiO2 nanoparticles are classified as “possible carcinogenic to humans” by the International Agency for Research on Cancer and as occupational carcinogen by the National Institute for Occupational Safety and Health. The studies on dermal exposure to TiO2 nanoparticles, which is in humans substantial through the use of sunscreens, generally indicate negligible transdermal penetration; however data are needed on long-term exposure and potential adverse effects of photo-oxidation products. Although TiO2 is permitted as an additive (E171) in food and pharmaceutical products we do not have reliable data on its absorption, distribution, excretion and toxicity on oral exposure. TiO2 may also enter environment, and while it exerts low acute toxicity to aquatic organisms, upon long-term exposure it induces a range of sub-lethal effects.
...
2025-08-14 14:42
1999
The refractive index of rutile TiO2 is among the highest known, which results in unparalleled hiding power in paints and coatings. Its ability to reflect light across a broad spectrum enhances the brightness and opacity of products, thereby reducing the amount of pigment required to achieve the desired effect. Consequently, rutile is frequently chosen over other types of TiO2 in industrial applications where high performance and cost efficiency are paramount.
topically via our skin.
Tints also enhance safety by providing a level of shatter resistance, and they can deter potential thieves by obscuring the view of valuable items inside the vehicle Tints also enhance safety by providing a level of shatter resistance, and they can deter potential thieves by obscuring the view of valuable items inside the vehicle
