
tio2 industry factories

Titanium dioxide nanoparticles may accumulate and cause DNA damage
Titanium Dioxide is largely produced by the reduction of titanium tetrachloride, obtained in turn from chlorination of natural rutile, synthetic rutile derived from ilmenite or even slags rich in TiO2 produced by metallurgical treatment of ilmenite. TiO2 is also manufactured by treatment of ilmenite with sulfuric acid. Raw materials and the respective production processes employed in the manufacturing of Titanium Dioxide are listed below.
The additive goes into a lot of personal care products to whiten and brighten colors and to make them opaque, like toothpaste and makeup.
Having thus described the origin and uses of the pigment, we now come to the question, what is lithopone? It is, in short, a chemical compound usually consisting of 30.5 per cent zinc sulphide, 1.5 per cent zinc oxide and 68 per cent barium sulphate, but these proportions vary slightly in the different makes. Lithopone of this composition is sold as the highest grade, either as red seal or green seal, as it best suits the idea of the manufacturer. Many manufacturers, especially in Europe, sell and also export other brands under other seals, containing 24, 20, 18 and as little as 12 per cent of zinc sulphide with very small percentages of zinc oxide, the balance being usually barium sulphate, but sometimes certain portions of China clay or gypsum (calcium sulphate) or whiting (calcium carbonate). Such brands are not a chemical compound, but mechanical mixtures of the chemically compounded lithopone and the admixtures referred to.