lithopone zns-baso4 quotes factory

 With the development of science and technology, various pigments have emerged. Inorganic pigments are facing serious challenges. Nanomaterials are a new class of materials with mesoscopic dimension developed at the end of the 20th century. They are now developing in a low-dimensional and complex direction. . In recent years, nano-Lide powder has been put into industrial production. The zinc sulphate solution is prepared in the same way as the traditional method. In the organic phase (such as benzene), the production cost is high, the wastewater is difficult to recycle, the organic solvent in the production process and the final immersion. Slag is likely to cause environmental pollution, and its development is severely limited.

...
...

 At present, Lide powder is mainly produced in China. Most of the domestic Lide powder production is still using traditional methods. The main raw materials are zinc oxide, sulfuric acid and barium sulfide (barite and coal are produced by high temperature reduction). Zinc 45% ~ 70%. The traditional method for producing the Liede powder process is to use zinc bakelite containing more than 45% zinc as a raw material to be leached with sulfuric acid to obtain a crude zinc sulfate solution, and then to remove iron by potassium permanganate, and then replace the heavy metal with zinc powder and filter to obtain zinc sulfate. The refined liquid is further subjected to metathesis reaction, pressure filtration, calcination, rinsing, drying, and pulverization with strontium sulfide to obtain a series of different types of lindose powder containing zinc sulfide of 30% or more. The whole process is carried out in an acidic (ra<7) environment, which consumes a large amount of sulfuric acid. The sulfuric acid has strong corrosiveness and requires high production equipment. The final discharged slag is acidic slag, which brings new pollution to the environment. High requirements, high production costs, and poor quality of the products obtained.

...